Drill Pilot Holes
From How to Install a Retractable Baby Gate on Stairs · Step 3 of 6 · Video by Bali Blinds

Showing 1:14–1:24 of the source video. Watch the full video with every moment.
What happens in this clip
Using your drill, create a pilot hole at each marked screw location. The correct drill bit size depends on your mounting surface: use a 1/16" bit for wood mounting surfaces, or a 3/32" bit for metal mounting surfaces. If you are mounting into drywall or plaster, use appropriate wall anchors and drill bits recommended for those anchors.
Goal: Create pilot holes for screw insertion
What's used
Tools
- 1/16" Drill Bit
- 3/32" Drill Bit
- Drill Cordless Drill
- Wall Anchors
- Self-drilling anchors
About the full video
This project provides step-by-step instructions for installing cordless cellular shades using an inside mount method. It covers marking bracket locations, drilling pilot holes, securing mounting brackets, attaching endcaps and lift handles, and finally mounting the shade for proper operation.
Step 3 of 6: Drill Pilot Holes
Select a drill bit that is slightly smaller in diameter than the screws that will be used for mounting the brackets. This prevents the wood from splitting and makes it easier to drive the screws. If mounting into a banister or solid wood, drill directly at the marked spots. If mounting into drywall without a stud, you will likely be using anchors, and the pilot hole size will depend on the anchor's specifications. Ensure the drill is held perpendicular to the surface for a straight hole.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes (this video)
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

