Install Lower Wall Mounts (First Side)
From How to Install a Retractable Baby Gate on Stairs · Step 1 of 6 · Video by Pauls Workshop

Showing 0:24–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
The installer begins by marking the desired position for the lower wall mounts on one side of the stairway opening. He then uses a cordless drill to create pilot holes in the wall or baseboard. Following this, he securely attaches the plastic wall mounts using screws, ensuring they are firmly in place. These mounts will serve as the anchor points for the gate.
Goal: Secure the lower wall mounts for the gate's first side
What's used
Tools
- Cordless Drill Milwaukee
- Manual screwdriver (for screws only)
- Drill Bit Unspecified
- Pencil/Marker Unspecified
- Screwdriver Bit Unspecified
- Screws Unspecified
- Wall Mounts (plastic) Unspecified
About the full video
This project provides a step-by-step guide on how to install a configurable plastic safety gate at the top of a steep carpeted stairway. The process involves marking and securely attaching wall mounts, assembling the gate panels, and finally securing the gate to these mounts to prevent access to the stairs.
Step 1 of 6: Determine Gate Placement
Assess the intended location for the baby gate. For top-of-stair installation, identify two vertical mounting surfaces (wall studs or banister posts) that are plumb and provide sufficient width for the gate. For bottom-of-stair installation, the same applies. Ensure that the chosen location allows the gate to swing open fully without obstruction and that the retraction mechanism will have a clear path. Consider the height of the mounting points to align with the gate's operational range. Use a level to mark potential bracket positions to ensure they are aligned horizontally.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side) (this video)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

