Install Gate onto Wall Fittings
From How to Install a Retractable Baby Gate on Stairs · Step 5 of 6 · Video by Safetots

Showing 5:13–5:39 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully take the gate and align the top and bottom spindle bolts on the hinge side with the corresponding hinge side fittings that are already installed on the wall. Gently lower the gate so that the spindle bolts slide into the fittings. The gate should drop into position. Ensure that there is roughly an equal distance between the wall and the nuts on all four spindle bolts. Don't worry about exact precision at this stage, as fine adjustments will be made later.
Goal: Position the gate in the opening and into its wall fittings
What's used
Tools
- Gate Assembly Safetots
- Hinge-Side Wall Fittings
About the full video
This project provides step-by-step instructions for assembling and installing the Safetots Chunky Wooden Screw-Fit Stairgate. It covers identifying parts, measuring the opening, connecting gate panels, installing one-way restrictors, using templates to mark screw points, preparing and inserting spindle bolts, and performing final adjustments for a secure fit.
Step 5 of 6: Attach the Gate Mechanism
Once the brackets are securely fastened, align the gate mechanism with the installed brackets. This often involves sliding the gate onto the brackets or clipping it into place. Refer to your specific gate model's manual for the precise method of attachment. Ensure that the gate is seated correctly and locks into place, if applicable. Some gates may have specific orientations for attachment.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings (this video)
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

