Mark Gate Mount Positions
From How to Install a Retractable Baby Gate on Stairs · Step 2 of 6 · Video by Carlson Pet Products

Showing 0:30–0:47 of the source video. Watch the full video with every moment.
What happens in this clip
Take the prepared paper wall mounting Template A. Carefully position it on the wall where the main retractable gate unit will be installed. Ensure the template is smooth and flush against the wall. Use masking tape to temporarily secure it in place if needed. Once positioned correctly, use your pencil to mark the exact locations of the screw holes for both the lower and upper gate mounts, as indicated on the template, directly onto the wall.
Goal: Accurately mark the screw hole locations for the gate mounts
What's used
Tools
- Masking Tape
- Paper Wall Mounting Template A
- Pencil
About the full video
This project provides step-by-step instructions for installing a Carlson retractable gate. The process includes using paper templates to mark mounting locations, drilling appropriate holes for studs or drywall, securing the gate and handle mounts with screws and wall anchors, and finally attaching and operating the retractable gate.
Step 2 of 6: Mark Bracket Positions
Refer to your specific retractable baby gate's installation manual for exact bracket placement guidelines. Typically, one bracket will be mounted on one side of the opening and the other on the opposite side. Use the measuring tape to ensure the distance between the marks corresponds to the gate's required width. Employ the level to confirm that the marks for each bracket are perfectly horizontal relative to each other. If mounting to a banister, ensure the marks are on a flat, stable section of the post.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions (this video)
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

