Install Retractable Gate
From How to Install a Retractable Baby Gate on Stairs · Step 5 of 6 · Video by Carlson Pet Products

Showing 2:22–2:34 of the source video. Watch the full video with every moment.
What happens in this clip
To attach the retractable gate itself, begin by aligning the bottom of the gate assembly with the installed lower gate mount. Slide the gate downwards until it is fully seated and engaged with the lower mount. Once the bottom of the gate is connected, push the top of the gate unit firmly towards the upper gate mount until it clicks securely into place. This action will secure the main gate unit to its mounting brackets.
Goal: Secure the main retractable gate unit to its installed upper and lower mounts
What's used
Tools
- Lower Gate Mount
- Retractable Gate Carlson
- connecting to the wall mounts.
- Upper Gate Mount
About the full video
This project provides step-by-step instructions for installing a Carlson retractable gate, including marking screw hole locations using paper templates, drilling pilot holes for mounts, attaching the gate and handle mounts to the wall, and finally, installing and demonstrating the operation and locking mechanism of the retractable gate.
What's said in this clip
screws to attach retractable gate align bottom of gate onto Lower Gate Mount while sliding down with bottom of gate connected to Lower Gate Mount push top of gate towards upper gate Mount to secure in place unlock to open gate extend gate by pulling gate handle to
Automatically transcribed from the source video.
Step 5 of 6: Attach the Gate Mechanism
Once the brackets are securely fastened, align the gate mechanism with the installed brackets. This often involves sliding the gate onto the brackets or clipping it into place. Refer to your specific gate model's manual for the precise method of attachment. Ensure that the gate is seated correctly and locks into place, if applicable. Some gates may have specific orientations for attachment.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate (this video)
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
Questions about How to Install a Retractable Baby Gate on Stairs
How do I ensure the retractable gate is securely mounted, especially if I can't hit a stud?
For maximum safety, always try to mount at least one side of the gate into a wall stud or solid wood banister. If a stud isn't available, use heavy-duty toggle anchors (like the E-Z Ancor 25720 mentioned) that are rated for significant pull-out force in drywall. Never rely solely on basic plastic drywall anchors for a baby gate.
What if my wall has a baseboard or trim that prevents the gate from mounting flush?
If baseboards or trim interfere, you'll need to use wood spacers or shims behind the mounting brackets to create a flush, level surface for the gate mechanism. Some gate kits include these, or you can cut your own from wood scraps to match the thickness of your trim. This ensures the gate operates smoothly and locks correctly.
What tools are absolutely essential for a successful installation, beyond the basic drill and measuring tape?
A reliable stud finder (like the DEWALT DW0150) is critical for locating solid mounting points in walls. A level is also essential to ensure the brackets are perfectly aligned for smooth gate operation and proper locking. Don't skip these for a secure and functional installation.
How can I mount this type of gate to a banister post without damaging it or compromising safety?
For banister posts, consider purchasing a banister mounting kit, often sold separately by gate manufacturers, which typically uses straps or clamps instead of drilling. If drilling is necessary, ensure the post is solid wood and pre-drill pilot holes to prevent splitting. Always confirm the gate is securely attached and stable.
What are common installation mistakes beginners make, and how can I avoid them?
A common mistake is not mounting into a stud or using inadequate anchors, leading to an insecure gate. Another is failing to level the brackets, which can prevent the gate from retracting or locking properly. Always double-check your measurements, use a level, and test the gate's security rigorously before use.
The project summary mentions different gate models. Does the installation process differ significantly between them?
While the core steps (mounting brackets, attaching the mechanism) are similar, specific dimensions, bracket designs, and locking mechanisms can vary between models. Always refer to the specific instruction manual for your chosen gate (e.g., Perma Child Safety 3116, 3122, or 2691) for precise guidance on measurements, hardware, and operational checks.
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

