Drill Pilot Holes
From How to Install a Retractable Baby Gate on Stairs · Step 3 of 6 · Video by LEVOLOR

Showing 1:58–2:05 of the source video. Watch the full video with every moment.
What happens in this clip
Using a power drill fitted with a 3/32 inch drill bit, carefully drill pilot holes at each of the marked screw hole locations. These pilot holes will guide the screws and prevent the wood from splitting when the brackets are attached.
Goal: Create pilot holes for bracket screws
What's used
Tools
- 3/32 inch Drill Bit
- Power Drill
About the full video
This project provides step-by-step instructions for installing custom motorized sheer shadings using an inside mount method. It covers preparing installation brackets, marking and drilling pilot holes, attaching brackets, installing batteries and battery clips, connecting power, and finally mounting the shading securely into the window frame.
What's said in this clip
meeting the mounting depth requirements shown in the chart use the rear set of holes with shallow mounting depths use the front set of holes when depth permits now drill the screw holes using a 3/32 inch drill bit next use a level to check that the mounting surface is level shim the
Automatically transcribed from the source video.
Step 3 of 6: Drill Pilot Holes
Select a drill bit that is slightly smaller in diameter than the screws that will be used for mounting the brackets. This prevents the wood from splitting and makes it easier to drive the screws. If mounting into a banister or solid wood, drill directly at the marked spots. If mounting into drywall without a stud, you will likely be using anchors, and the pilot hole size will depend on the anchor's specifications. Ensure the drill is held perpendicular to the surface for a straight hole.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes (this video)
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
Questions about How to Install a Retractable Baby Gate on Stairs
How do I ensure the retractable gate is securely mounted, especially if I can't hit a stud?
For maximum safety, always try to mount at least one side of the gate into a wall stud or solid wood banister. If a stud isn't available, use heavy-duty toggle anchors (like the E-Z Ancor 25720 mentioned) that are rated for significant pull-out force in drywall. Never rely solely on basic plastic drywall anchors for a baby gate.
What if my wall has a baseboard or trim that prevents the gate from mounting flush?
If baseboards or trim interfere, you'll need to use wood spacers or shims behind the mounting brackets to create a flush, level surface for the gate mechanism. Some gate kits include these, or you can cut your own from wood scraps to match the thickness of your trim. This ensures the gate operates smoothly and locks correctly.
What tools are absolutely essential for a successful installation, beyond the basic drill and measuring tape?
A reliable stud finder (like the DEWALT DW0150) is critical for locating solid mounting points in walls. A level is also essential to ensure the brackets are perfectly aligned for smooth gate operation and proper locking. Don't skip these for a secure and functional installation.
How can I mount this type of gate to a banister post without damaging it or compromising safety?
For banister posts, consider purchasing a banister mounting kit, often sold separately by gate manufacturers, which typically uses straps or clamps instead of drilling. If drilling is necessary, ensure the post is solid wood and pre-drill pilot holes to prevent splitting. Always confirm the gate is securely attached and stable.
What are common installation mistakes beginners make, and how can I avoid them?
A common mistake is not mounting into a stud or using inadequate anchors, leading to an insecure gate. Another is failing to level the brackets, which can prevent the gate from retracting or locking properly. Always double-check your measurements, use a level, and test the gate's security rigorously before use.
The project summary mentions different gate models. Does the installation process differ significantly between them?
While the core steps (mounting brackets, attaching the mechanism) are similar, specific dimensions, bracket designs, and locking mechanisms can vary between models. Always refer to the specific instruction manual for your chosen gate (e.g., Perma Child Safety 3116, 3122, or 2691) for precise guidance on measurements, hardware, and operational checks.
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

