Position Gate and Mark Wall Cups
From How to Install a Retractable Baby Gate on Stairs · Step 1 of 6 · Video by RegaloBaby

Showing 0:39–0:47 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully position the assembled gate within your doorway or opening. Ensure that the gate is both level and centered to provide optimal functionality and aesthetics. Once the gate is in its desired position, use a pencil to trace the exact location on the wall where each of the four spindle rods makes contact. These marks will indicate where the wall cups need to be installed.
Goal: Align gate and mark mounting points
What's used
Tools
- Pencil
About the full video
This project provides step-by-step instructions for installing a Regalo Easy Step Safety Gate. It covers assembly of the frame and door, adding extensions if needed, positioning the gate, marking and installing wall cups, tightening the spindle rods for a secure pressure mount, and demonstrating proper operation and safety features.
Step 1 of 6: Determine Gate Placement
Assess the intended location for the baby gate. For top-of-stair installation, identify two vertical mounting surfaces (wall studs or banister posts) that are plumb and provide sufficient width for the gate. For bottom-of-stair installation, the same applies. Ensure that the chosen location allows the gate to swing open fully without obstruction and that the retraction mechanism will have a clear path. Consider the height of the mounting points to align with the gate's operational range. Use a level to mark potential bracket positions to ensure they are aligned horizontally.
Every video in How to Install a Retractable Baby Gate on Stairs
Step 1: Determine Gate Placement
- 2:14–3:30 Mount Gate Assembly Brackets
- 0:39–0:47 Position Gate and Mark Wall Cups (this video)
- 0:24–0:31 Install Lower Wall Mounts (First Side)
Step 2: Mark Bracket Positions
- 3:17–4:33 Mark Latching Side Bracket Locations
- 0:30–0:47 Mark Gate Mount Positions
- 3:44–4:19 Secure Mounting Brackets (Side 2)
Step 3: Drill Pilot Holes
- 1:14–1:24 Drill Pilot Holes
- 1:58–2:05 Drill Pilot Holes
- 0:00–0:19 Drill Pilot Holes
Step 4: Mount the Brackets
- 1:56–2:34 Install Mounting Brackets
- 0:19–0:22 Mount Wall Brackets
- 8:16–10:38 Mount the Brackets
Step 5: Attach the Gate Mechanism
- 2:22–2:34 Install Retractable Gate
- 5:13–5:39 Install Gate onto Wall Fittings
- 7:06–8:41 Test Gate Operation and Tighten Adjustments
Step 6: Test Gate Operation and Lock
- 1:51–1:59 Test Gate Operation
- 3:05–3:19 Test Gate Operation and SecurTech Lock
- 17:06–18:29 Test Gate Functionality and Latch
How to Install a Retractable Baby Gate on Stairs
Install a retractable baby gate at the top or bottom of a staircase to ensure child safety. This typically involves mounting brackets to the wall or banister posts and then attaching the gate mechanism.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

