powered by

Plan the L-Shaped Winder Staircase Design

From How to Lay Out Winder Stairs · Step 5 of 7 · Video by gregvancom

Showing 8:11–8:46 of the source video. Watch the full video with every moment.

What happens in this clip

The video then presents an L-shaped winder staircase design that will be virtually constructed. The design features a narrow point tread depth of 1 foot 8 inches and a total length of 5 feet 10 inches for the straight run. The winder section transitions smoothly with multiple angled treads leading into the straight section. The presenter specifies using 30-inch wide material for the stairs, 1 1/2-inch thick material for the treads, and 1-inch thick material for the risers. These dimensions are based on typical lumber sizes.

Goal: Establish the dimensions and materials for the virtual winder staircase build.

What's used

Tools

  • Staircase Design Plan

Materials

  • Lumber (for Risers)
  • MDF
  • Lumber (for Treads)

About the full video

This video provides an in-depth guide on designing and virtually constructing an L-shaped winder staircase that adheres to the 2024 International Residential Code (IRC). It covers critical code requirements for tread depth at the narrowest point and walkline, demonstrates various design approaches for winder treads, highlights potential code violations, and then walks through the virtual assembly of a compliant winder staircase, emphasizing structural support and proper component installation.

What's said in this clip

extremely small steps. In this video, I will be showing you how to build a set of stairs that I'm assuming is from Russia or that area, and it's a set of stairs that wouldn't be approved in the United States. I just don't see it happening. And depending upon how well the video does, I will be making other videos showing you how the handrails go together and other stairs that I've seen them build. And of course, how to build them a little better without spending any more money in some cases. So, here are the measurements for a winder stairway coming to a point here, center

Automatically transcribed from the source video.

Step 5 of 7: Determine Winder Tread Layout

This is the most critical step for winder stairs. The layout involves creating a series of angled lines that represent the edge of each winder tread. The narrowest point of the winder tread (at the inside of the turn) must be at least 6 inches wide to meet code. The widest point (at the outside of the turn) will be determined by the overall stair width and the angle of the turn. Use geometry and precise measurements to ensure the tread's 'walking line' (typically 12 inches from the outer edge) has the required depth and that the tread is not excessively tapered. This often involves using a compass or string to draw arcs at the inner and outer edges of the turn.

Open this step in the guide

Every video in How to Lay Out Winder Stairs

  1. Step 1: Determine Total Rise and Run

  2. Step 2: Calculate Number of Treads and Risers

  3. Step 3: Determine Tread Depth and Landing Dimensions

  4. Step 4: Layout the Stair Angle and Width

  5. Step 5: Determine Winder Tread Layout

  6. Step 6: Mark Stringers for Winder Treads

  7. Step 7: Cut Stringers

Questions about How to Lay Out Winder Stairs

Do I really need specialized calculators like the Construction Master for laying out winder stairs?

Yes, specialized construction calculators are highly recommended as they significantly simplify the complex trigonometric and geometric calculations unique to winder stairs. They help ensure accurate tread depths and riser heights, which are crucial for safety and code compliance, making errors much less likely.

What are the most critical safety considerations specific to laying out winder stairs?

The most critical safety consideration is ensuring consistent and code-compliant tread depths and riser heights across all steps, especially where the treads narrow or widen. Any inconsistency can create significant trip hazards. Always verify your calculations and markings against local building codes before cutting anything.

Is the 'intermediate' difficulty and '4-day' estimate realistic for someone with limited DIY experience?

For someone with limited DIY experience, the 'intermediate' difficulty might lean towards advanced, and the 4-day estimate for layout could be optimistic. Winder stairs involve complex geometry. It's advisable to dedicate extra time for careful planning, double-checking calculations, and practicing on scrap material if unsure.

What are common mistakes made during winder stair layout, and how can they be avoided?

A common mistake is incorrect or inconsistent tread run measurements in the winder section, leading to dangerous wedge shapes. Another is miscalculating the total rise or run. Avoid these by meticulously checking all measurements multiple times, using precise tools, and referencing local building codes for minimum tread depths at the narrowest point.

Are there any simpler alternatives to complex winder stair layouts if I find the calculations too daunting?

While the geometry is inherently complex, using construction calculators or specialized software can greatly simplify the math. If space permits, a full landing often replaces winder sections, which simplifies the layout significantly. Consulting an architect or engineer for the initial design can also ensure accuracy.

How crucial is precision in winder stair layout, and what happens if I'm slightly off?

Precision is paramount. Even slight inaccuracies in winder stair layout can result in steps that are unsafe, uncomfortable to use, or non-compliant with building codes. Incorrect measurements can lead to varying riser heights or tread depths, creating trip hazards that are difficult and costly to correct after construction.

How to Lay Out Winder Stairs

This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Plan the L-Shaped Winder Staircase Design — How to Lay Out Winder Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.