Measure Total Rise
From How to Lay Out Winder Stairs · Step 1 of 7 · Video by Frugal Off Grid

Showing 0:04–0:30 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by accurately measuring the total vertical rise that the staircase needs to cover. This measurement should be taken from the top of the finished lower floor to the top of the finished upper floor. If the finished flooring on the upper level is not yet installed, measure to the top of the subfloor and add the anticipated thickness of the finished flooring (e.g., 2 inches as mentioned in the video for future boards). This overall height is crucial for calculating consistent step dimensions.
Goal: Measure the total vertical distance from the finished lower floor surface to the finished upper floor surface, accounting for any future flooring installations.
What's used
Tools
- Tape Measure
About the full video
This video provides a practical method for accurately laying out stair stringers to ensure consistent and comfortable steps. The technique focuses on precise measurements and calculations for individual rise and run, followed by using a speed square for marking and creating a cut-off piece as a jig to maintain accuracy across all steps, while also accounting for finished flooring thickness.
What's said in this clip
stairs the first step is to measure from a finished surface to a finished surface so if you didn't have that flooring up there yet you would just measure from the finished surface to what the finished surface will be in the future those boards are 2 in thick so you would add 2 in to the joist hangers finish surface to finish surface in this case it's 85.5 in
Automatically transcribed from the source video.
Step 1 of 7: Determine Total Rise and Run
Measure the exact vertical distance from the finished floor of the lower level to the finished floor of the upper level to determine the total rise. Measure the available horizontal space for the stairs to determine the total run. These two measurements are fundamental for all subsequent calculations.
Every video in How to Lay Out Winder Stairs
Step 1: Determine Total Rise and Run
- 2:54–4:34 Determine the Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise (this video)
Step 2: Calculate Number of Treads and Risers
- 2:59–6:51 Calculate Number of Risers and Treads
- 8:59–9:54 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
Step 3: Determine Tread Depth and Landing Dimensions
Step 4: Layout the Stair Angle and Width
- 4:54–6:32 Lay Out Stringers
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 0:11–1:48 Calculate and Layout Staircase Dimensions
Step 5: Determine Winder Tread Layout
Step 6: Mark Stringers for Winder Treads
- 6:54–8:50 Marking Stringers
- 0:59–1:13 Mark First Step Cuts
- 1:28–2:15 Implement the Nosing Offset Adjustment
Step 7: Cut Stringers
- 9:35–10:04 Cut the Stringer
- 15:28–20:38 Cut Stringers
- 0:42–0:53 Cut the Stringers
How to Lay Out Winder Stairs
This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

