Calculate Number of Risers and Treads
From How to Lay Out Winder Stairs · Step 2 of 7 · Video by HouseImprovements

Showing 8:59–9:54 of the source video. Watch the full video with every moment.
What happens in this clip
With a total rise of 104 inches, the speaker estimates 14 risers. Dividing 104 by 14 yields approximately 7.43 inches per riser (or 7 7/16 inches), which falls within his local code's acceptable range (5 3/4 to 8 inches). For a staircase, the number of treads is always one less than the number of risers, meaning there will be 13 treads. He notes that if the initial estimation of risers results in an individual riser height outside the acceptable range, the number of risers should be adjusted (e.g., adding or removing one) and the calculation repeated.
Goal: Using the total rise, calculate the optimal number of risers and corresponding treads, ensuring individual riser heights are within code and comfortable limits.
What's used
Tools
- Calculator
About the full video
This video provides a detailed guide on planning and dimensioning a staircase, focusing on understanding building codes, measuring key components like total rise, total run, headroom, and selecting appropriate materials. It covers essential terminology, calculation methods, and practical considerations for ensuring a safe and compliant staircase installation.
What's said in this clip
head room is going to be all right okay so I've already worked out the math so we had our total rise of 104 in so 104 divided by 14 I just took a rough guess I originally divided it by 133 but that gave me too big of a rise so then I went up one more Riser so 14 was my guess 104 divided by 14 risers gives me 7.43 in which is 7 and 7 16 well that falls in our in our comfort zone for what our Riser Heights can be and it's it's pretty comfortable step honestly so we're going to use 7 and 716 and 14 risers now I already said we're we always end up with one less tread than we do Riser so that means we're going to have 13 Treads the tread material I have is 11
Automatically transcribed from the source video.
Step 2 of 7: Calculate Number of Treads and Risers
Divide the total rise by a standard riser height (typically 7 to 7.75 inches) to get an approximate number of risers. Round this to the nearest whole number. Then, calculate the exact riser height by dividing the total rise by the chosen number of risers. The number of treads will be one less than the number of risers.
Every video in How to Lay Out Winder Stairs
Step 1: Determine Total Rise and Run
- 2:54–4:34 Determine the Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Treads and Risers
- 2:59–6:51 Calculate Number of Risers and Treads
- 8:59–9:54 Calculate Number of Risers and Treads (this video)
- 0:32–0:54 Calculate Number of Risers
Step 3: Determine Tread Depth and Landing Dimensions
Step 4: Layout the Stair Angle and Width
- 4:54–6:32 Lay Out Stringers
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 0:11–1:48 Calculate and Layout Staircase Dimensions
Step 5: Determine Winder Tread Layout
Step 6: Mark Stringers for Winder Treads
- 6:54–8:50 Marking Stringers
- 0:59–1:13 Mark First Step Cuts
- 1:28–2:15 Implement the Nosing Offset Adjustment
Step 7: Cut Stringers
- 9:35–10:04 Cut the Stringer
- 15:28–20:38 Cut Stringers
- 0:42–0:53 Cut the Stringers
How to Lay Out Winder Stairs
This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

