Calculate Individual Riser Height & Tread Depth
From How to Lay Out Winder Stairs · Step 3 of 7 · Video by AwesomeFramers

Showing 2:05–2:24 of the source video. Watch the full video with every moment.
What happens in this clip
Using the total calculated rise of 119 3/8 inches, divide this by the total number of risers (16). This calculation yields an individual riser height of 7 7/16 inches. This ensures all risers are equal in height, which is essential for safety and craftsmanship. Simultaneously, determine the desired tread depth (run). A standard tread depth of 10 inches is chosen for this staircase. These two dimensions (7 7/16" rise and 10" tread) will be used to mark the stringers.
Goal: Divide the total rise by the number of risers to find the exact height of each individual riser. Select a suitable tread depth (run).
What's used
Tools
- Construction Calculator
- Marker
About the full video
This video provides a detailed guide on how to calculate, mark, and cut stair stringers using mathematical calculations and gang-cutting techniques. It emphasizes the importance of precise measurements for total rise, individual riser height, and tread depth, adjusting for flooring and tread/riser material thickness. The video also highlights the advantages of using LVL (Laminated Veneer Lumber) over traditional lumber for consistency and durability in stair construction.
What's said in this clip
And that is from the top of the floor down to here. So, we're going to divide that by 16. I think it was 119. Yeah. 119 and 38. Always double check yourself twice. So 119 and 3/8 divided by 16 is a 7 and 7/16 riser riser. And we're going to go with a 10-in tread. I have to figure out where my two landings are. So if I look at this guy
Automatically transcribed from the source video.
Step 3 of 7: Determine Tread Depth and Landing Dimensions
Using the total run available and the number of treads, calculate the nominal tread depth. Ensure this depth, when combined with the riser height, meets the '2R + T' rule (twice the rise plus the tread depth should be between 24 and 25 inches) for comfortable and safe walking. If a landing is required, ensure its dimensions meet code (typically at least as wide as the stair and as deep as the stair's run).
Every video in How to Lay Out Winder Stairs
Step 1: Determine Total Rise and Run
- 2:54–4:34 Determine the Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Treads and Risers
- 2:59–6:51 Calculate Number of Risers and Treads
- 8:59–9:54 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
Step 3: Determine Tread Depth and Landing Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth (this video)
- 5:03–6:09 Determine Tread Overhang and Length
- 3:14–4:28 Minimum Tread Depth and Landing Dimensions
Step 4: Layout the Stair Angle and Width
- 4:54–6:32 Lay Out Stringers
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 0:11–1:48 Calculate and Layout Staircase Dimensions
Step 5: Determine Winder Tread Layout
Step 6: Mark Stringers for Winder Treads
- 6:54–8:50 Marking Stringers
- 0:59–1:13 Mark First Step Cuts
- 1:28–2:15 Implement the Nosing Offset Adjustment
Step 7: Cut Stringers
- 9:35–10:04 Cut the Stringer
- 15:28–20:38 Cut Stringers
- 0:42–0:53 Cut the Stringers
How to Lay Out Winder Stairs
This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

