Determine the Total Rise
From How to Lay Out Winder Stairs · Step 1 of 7 · Video by Training Hands Academy

Showing 2:54–4:34 of the source video. Watch the full video with every moment.
What happens in this clip
Measure the total vertical distance from the *finished* lower floor to the *finished* upper floor. If the subfloor is exposed on the upper level, place a sample piece of your finished flooring on top of the subfloor before taking the measurement. Similarly, if the lower floor is not finished (e.g., dirt), place a sample of the intended finished flooring (e.g., patio blocks) before measuring. For this project, the finished concrete floor on the bottom and a finished pine floor on top result in a total rise of 36.5 inches (927 millimeters). Additionally, check if the floor is level further away from the stairwell header by extending a level beyond the header and measuring down; use the measurement from where the stringer will actually sit if there's a difference.
Goal: Accurately measure the vertical distance between finished floor levels
What's used
Tools
- Level
- Tape Measure
Materials
- Sample Finished Flooring (e.g.
- pine
- hardwood
- tile)
About the full video
This project provides a detailed guide on how to figure out the dimensions, lay out, and cut stair stringers for a basic set of stairs. It covers essential terminology, mathematical calculations for total rise, total run, unit rise, and unit run, as well as considerations for attachment methods and tread thickness. The instructions culminate in the marking and cutting of a wooden stringer using a framing square, circular saw, and hand saw.
Step 1 of 7: Determine Total Rise and Run
Measure the exact vertical distance from the finished floor of the lower level to the finished floor of the upper level to determine the total rise. Measure the available horizontal space for the stairs to determine the total run. These two measurements are fundamental for all subsequent calculations.
Every video in How to Lay Out Winder Stairs
Step 1: Determine Total Rise and Run
- 2:54–4:34 Determine the Total Rise (this video)
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Treads and Risers
- 2:59–6:51 Calculate Number of Risers and Treads
- 8:59–9:54 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
Step 3: Determine Tread Depth and Landing Dimensions
Step 4: Layout the Stair Angle and Width
- 4:54–6:32 Lay Out Stringers
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 0:11–1:48 Calculate and Layout Staircase Dimensions
Step 5: Determine Winder Tread Layout
Step 6: Mark Stringers for Winder Treads
- 6:54–8:50 Marking Stringers
- 0:59–1:13 Mark First Step Cuts
- 1:28–2:15 Implement the Nosing Offset Adjustment
Step 7: Cut Stringers
- 9:35–10:04 Cut the Stringer
- 15:28–20:38 Cut Stringers
- 0:42–0:53 Cut the Stringers
How to Lay Out Winder Stairs
This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

