Calculate Number of Risers
From How to Lay Out Winder Stairs · Step 2 of 7 · Video by stairbuilding

Showing 0:32–0:54 of the source video. Watch the full video with every moment.
What happens in this clip
To calculate the number of risers, divide your 'total rise' measurement by a comfortable and code-compliant 'unit rise' (the height of a single step). Standard building codes often suggest a maximum unit rise of about 7.75 inches, but a comfortable height is usually around 7.5 inches. In the video's example, with a total rise of 60 inches, dividing by 7.5 inches (60 / 7.5) yields 8 risers.
Goal: Determine the number of individual risers needed for the stairs by dividing the total rise by an appropriate unit rise (individual step height).
What's used
Tools
- Calculator
About the full video
This video provides step-by-step instructions for accurately laying out deck stair stringers by calculating the total rise, determining the number of risers and treads, and then calculating the total run to find the precise landing point for the stairs. This method helps avoid common mistakes in stair construction.
Step 2 of 7: Calculate Number of Treads and Risers
Divide the total rise by a standard riser height (typically 7 to 7.75 inches) to get an approximate number of risers. Round this to the nearest whole number. Then, calculate the exact riser height by dividing the total rise by the chosen number of risers. The number of treads will be one less than the number of risers.
Every video in How to Lay Out Winder Stairs
Step 1: Determine Total Rise and Run
- 2:54–4:34 Determine the Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Treads and Risers
- 2:59–6:51 Calculate Number of Risers and Treads
- 8:59–9:54 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers (this video)
Step 3: Determine Tread Depth and Landing Dimensions
Step 4: Layout the Stair Angle and Width
- 4:54–6:32 Lay Out Stringers
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 0:11–1:48 Calculate and Layout Staircase Dimensions
Step 5: Determine Winder Tread Layout
Step 6: Mark Stringers for Winder Treads
- 6:54–8:50 Marking Stringers
- 0:59–1:13 Mark First Step Cuts
- 1:28–2:15 Implement the Nosing Offset Adjustment
Step 7: Cut Stringers
- 9:35–10:04 Cut the Stringer
- 15:28–20:38 Cut Stringers
- 0:42–0:53 Cut the Stringers
How to Lay Out Winder Stairs
This project outlines the process for accurately laying out winder stairs, which feature wedge-shaped treads that turn a corner. The process involves careful measurement, mathematical calculations, and precise marking to ensure safety, code compliance, and aesthetic appeal.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

