Mark Handrail and Newel Post for Installation
From How to Install a Handrail Return at the End of a Rail · Step 1 of 6 · Video by StairBox

Showing 0:12–0:29 of the source video. Watch the full video with every moment.
What happens in this clip
Ensure your newel posts are securely fixed in place. Determine the desired height for your handrail, keeping in mind that the minimum height required by building regulations is 900mm (approximately 35.4 inches). Next, use a pencil to mark a point approximately 30mm (about 1.2 inches) lower than the intended top of your handrail. This mark should be centered horizontally on the newel post. Create a corresponding mark centrally on the end face of the handrail, ensuring it aligns with the mark on the newel post.
Goal: Accurately mark the points for handrail attachment on both the newel post and the handrail.
What's used
Tools
- Handrail
- Newel Post
- Pencil
- Tape Measure
About the full video
This project details the process of installing a handrail to a newel post using the Stairbox Rail Fix System. It covers marking the installation points, drilling the newel post, securing the hook plate, preparing the handrail with the system screw, and finally joining the handrail to the newel post.
Step 1 of 6: Mark Handrail Return Position
Using a tape measure and pencil, accurately mark the point on the wall or newel post where the end of the handrail return will be positioned. This mark should account for the final height and projection of the return.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
- 0:12–0:29 Mark Handrail and Newel Post for Installation (this video)
- 1:48–2:13 Mark Handrail Line and Bracket Positions
- 0:50–1:09 Mark Handrail Location on Newel Post
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

