Attach Handrail to Newel Post
From How to Install a Handrail Return at the End of a Rail · Step 5 of 6 · Video by Skill Builder

Showing 0:15–0:22 of the source video. Watch the full video with every moment.
What happens in this clip
Align the handrail with the prepared housing joint on the newel post. Use a strap clamp to apply tension, pulling the handrail firmly into the newel post. If needed, gently tap the handrail into its final position using a hammer and a sacrificial wooden block to prevent damage. Add additional clamps, such as F-clamps or bar clamps, to hold the handrail securely in place while the adhesive cures. Ensure the handrail is level and flush.
Goal: Securely fasten the handrail to the newel post
What's used
Tools
- Clamps Unicomp
- Irwin
- Quick-grip clamps
- C-clamps
- Hammer
- Handrail
- Newel Post
- Strap Clamp Uniclamp
- Web clamp
- Wooden Block
About the full video
This project details the process of installing a wooden balustrade on a staircase, including preparing the newel post and handrail for connection, securely attaching the handrail, installing the base rail, and finally cutting, gluing, and nailing the balusters into place to create a robust and aesthetically pleasing railing system.
Step 5 of 6: Mount Handrail Assembly to Wall/Newel Post
Using the marked position as a guide, attach the handrail assembly. This typically involves screwing through the handrail and into wall studs or blocking, or into the newel post. Ensure the attachment is strong and stable.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post (this video)
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

