Cut Handrail Ends with Miter Saw
From How to Install a Handrail Return at the End of a Rail · Step 2 of 6 · Video by This Old House

Showing 2:44–3:21 of the source video. Watch the full video with every moment.
What happens in this clip
Set a miter saw to a 45-degree angle. Position the handrail on the saw with the top surface facing upwards. Carefully align the saw blade with your previously marked lines on the handrail. Make the first cut, then reset the miter saw to cut the opposing 45-degree angle on the other end of the handrail, aligning the blade with the second mark. These cuts will create the necessary mitered ends for attaching the returns.
Goal: Use a miter saw to cut the ends of the handrail at a 45-degree angle, ensuring precise miter joints.
What's used
Tools
- Miter Saw
- Pencil
- Swanson Speed Square
About the full video
This video provides a detailed guide on installing a wooden handrail along a staircase, adhering to building code height requirements. It covers essential steps from accurately marking the wall for bracket placement and cutting the railing to size, to attaching mitered returns and finally mounting the railing securely to the wall.
Step 2 of 6: Prepare Handrail End for Return
Depending on the type of return (e.g., volute, easing, or a simple angle), you may need to cut the existing handrail end to a specific angle or shape. This often involves using a miter saw or coping saw to create a clean joint. For some returns, a specific fitting may require a pre-cut notch or end profile.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw (this video)
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

