Dry Fit Handrail over Balusters
From How to Install a Handrail Return at the End of a Rail · Step 3 of 6 · Video by DIYTyler

Showing 5:43–5:52 of the source video. Watch the full video with every moment.
What happens in this clip
Once the balusters are dry-fitted, position the handrail over them and against the newel post to ensure all components fit together as intended. Check for proper height, angle, and alignment. Make any minor adjustments before proceeding with finishing and permanent installation.
About the full video
This video provides a detailed guide on constructing and installing a newel post, balusters, and a handrail with a custom return end for a staircase. The project involves preparing raw lumber, assembling the newel post components, accurately cutting and drilling for balusters, creating the handrail return end, and finally, installing and finishing all elements for a polished look.
Step 3 of 6: Fit and Test Handrail Return
Align the handrail return with the cut end of the handrail and the marked position on the wall or newel post. Check for a snug fit and proper alignment. Make any minor adjustments needed to ensure a seamless transition.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters (this video)
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
Questions about How to Install a Handrail Return at the End of a Rail
Do I absolutely need a miter saw for this project, or are there alternatives for cutting the handrail return?
A miter saw provides precise, clean cuts essential for a tight-fitting handrail return, especially for angled returns. While you could use a handsaw with a miter box, it requires more effort and might not achieve the accuracy needed for a professional finish. For the best results and easier work, a miter saw is highly recommended.
What critical safety steps should I take when cutting and installing the handrail return?
Always wear safety goggles when using power tools like a miter saw and drill to protect your eyes from debris. Ensure your handrail and return pieces are securely clamped before cutting or drilling to prevent movement and potential injury. Work in a well-lit area and keep your workspace clear of obstructions.
What's the biggest mistake beginners make with handrail returns, and how can I avoid it?
A common mistake is inaccurate measuring or cutting, leading to noticeable gaps where the return meets the main handrail or wall. To avoid this, always measure twice and cut once. Perform dry-fits of the return multiple times before applying any adhesive or performing final fastening to ensure a perfect fit.
Is the 4-hour estimate realistic for a beginner, and what makes this project suitable for DIYers?
Yes, 4 hours is a realistic estimate for beginners, assuming you have the necessary tools and a basic understanding of their operation. This project is beginner-friendly because it involves straightforward measuring, cutting, and fastening steps. Taking your time with each stage, especially precise measurements and dry-fitting, will contribute to a successful outcome.
How do I ensure the handrail return matches up perfectly with my existing handrail for a seamless look?
Achieving a seamless look depends on precise cuts and a snug fit between the return and the main handrail. Carefully mark your cut lines, and if your return is unfinished, match its stain or paint to your existing handrail after installation for a cohesive appearance. Slight gaps can sometimes be filled with wood putty before finishing.
How do I ensure the handrail return is securely attached to both the main handrail and the wall?
For the handrail-to-return connection, use strong construction adhesive along with screws, pre-drilling pilot holes to prevent splitting. When mounting the entire handrail assembly to the wall, always use a stud finder to locate wall studs and fasten directly into them for maximum security. If a stud isn't available, use appropriate heavy-duty wall anchors designed for the weight of a handrail.
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

