Mark Handrail Location on Newel Post
From How to Install a Handrail Return at the End of a Rail · Step 1 of 6 · Video by Fastener Unlimited Inc

Showing 0:50–1:09 of the source video. Watch the full video with every moment.
What happens in this clip
Determine the desired handrail location on the newel post by measuring from the floor up. Mark the top of the railing height, the bottom of the railing, and the center point for the fastener. This ensures the handrail is installed at the correct and consistent height.
Goal: Accurately mark the attachment points for the handrail on the newel post.
What's used
Tools
- Newel Post
- Pencil
- Tape Measure Stanley PowerLock
About the full video
This project provides detailed, step-by-step instructions on how to install a MiniLock fastener to securely connect a handrail to a newel post. The process involves precise marking, drilling specific recesses and pilot holes, installing the concealed fastener plate and screw, and then assembling and fine-tuning the connection for a strong and seamless result. The video also showcases alternative installation methods and applications for the MiniLock fastener.
Step 1 of 6: Mark Handrail Return Position
Using a tape measure and pencil, accurately mark the point on the wall or newel post where the end of the handrail return will be positioned. This mark should account for the final height and projection of the return.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
- 0:12–0:29 Mark Handrail and Newel Post for Installation
- 1:48–2:13 Mark Handrail Line and Bracket Positions
- 0:50–1:09 Mark Handrail Location on Newel Post (this video)
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

