Final Sanding and Cleaning
From How to Install a Handrail Return at the End of a Rail · Step 6 of 6 · Video by BYOT

Showing 1:53–2:04 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by sanding the entire handrail surface with a random orbital sander, starting with 100-grit sandpaper and progressing to 220-grit. Pay close attention to the routed edges and the previously glued joint to ensure they are exceptionally smooth. For the rounded edges and any areas the orbital sander cannot reach, use 220-grit sandpaper and hand-sand until a 'buttery' smooth texture is achieved. After sanding, thoroughly wipe down the entire handrail with mineral spirits using lint-free cloths. This step removes all lingering sawdust, oils, and contaminants, creating an optimal surface for the finish to adhere.
Goal: Perform a comprehensive final sanding and cleaning of the handrail to prepare it for finishing, ensuring a perfectly smooth and dust-free surface.
What's used
Tools
- Lint-free Cloths
- Random Orbital Sander Bosch
Materials
- Mineral Spirits
- Sandpaper (100-grit)
- Sandpaper (220-grit)
About the full video
This project details the construction and installation of a custom walnut handrail with elegant return ends and integrated LED lighting for a staircase. It covers creating a strong halving joint, shaping the wood, routing channels for lighting, applying a durable finish, and securely mounting the handrail to the wall, providing both aesthetic appeal and enhanced safety.
What's said in this clip
smoothing out the entire area now your joints never gonna look perfect with just a saab but all you have to do is take a rigid sanding block with a hundred grit sandpaper and sand off the remainder that way you can easily clean up that joint and it's time for gluing now the reason why we are doing a helvin joint is because a butt joint is not going to be strong enough for this type of application Elise in my opinion it's gonna have a lot of weight on a handrail and I don't want an issue with it
Automatically transcribed from the source video.
Step 6 of 6: Finish and Inspect
Sand the entire handrail assembly smooth, paying attention to the joints. Fill any screw holes or imperfections with wood filler and allow it to dry. Once dry, sand the filled areas flush. Apply stain, paint, or sealant to match the existing handrail and surrounding finishes. Inspect the entire installation for stability and appearance.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning (this video)
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
Questions about How to Install a Handrail Return at the End of a Rail
Do I absolutely need a miter saw for this project, or are there alternatives for cutting the handrail return?
A miter saw provides precise, clean cuts essential for a tight-fitting handrail return, especially for angled returns. While you could use a handsaw with a miter box, it requires more effort and might not achieve the accuracy needed for a professional finish. For the best results and easier work, a miter saw is highly recommended.
What critical safety steps should I take when cutting and installing the handrail return?
Always wear safety goggles when using power tools like a miter saw and drill to protect your eyes from debris. Ensure your handrail and return pieces are securely clamped before cutting or drilling to prevent movement and potential injury. Work in a well-lit area and keep your workspace clear of obstructions.
What's the biggest mistake beginners make with handrail returns, and how can I avoid it?
A common mistake is inaccurate measuring or cutting, leading to noticeable gaps where the return meets the main handrail or wall. To avoid this, always measure twice and cut once. Perform dry-fits of the return multiple times before applying any adhesive or performing final fastening to ensure a perfect fit.
Is the 4-hour estimate realistic for a beginner, and what makes this project suitable for DIYers?
Yes, 4 hours is a realistic estimate for beginners, assuming you have the necessary tools and a basic understanding of their operation. This project is beginner-friendly because it involves straightforward measuring, cutting, and fastening steps. Taking your time with each stage, especially precise measurements and dry-fitting, will contribute to a successful outcome.
How do I ensure the handrail return matches up perfectly with my existing handrail for a seamless look?
Achieving a seamless look depends on precise cuts and a snug fit between the return and the main handrail. Carefully mark your cut lines, and if your return is unfinished, match its stain or paint to your existing handrail after installation for a cohesive appearance. Slight gaps can sometimes be filled with wood putty before finishing.
How do I ensure the handrail return is securely attached to both the main handrail and the wall?
For the handrail-to-return connection, use strong construction adhesive along with screws, pre-drilling pilot holes to prevent splitting. When mounting the entire handrail assembly to the wall, always use a stud finder to locate wall studs and fasten directly into them for maximum security. If a stud isn't available, use appropriate heavy-duty wall anchors designed for the weight of a handrail.
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

