Install Handrail to Newel Post and Wall
From How to Install a Handrail Return at the End of a Rail · Step 5 of 6 · Video by Platoon Garage

Showing 12:33–14:45 of the source video. Watch the full video with every moment.
What happens in this clip
The assembled S-turn handrail is now ready for installation. The presenter places the handrail onto the previously installed newel post and wall brackets. He aligns the handrail and then uses a drill to drive screws through the wall brackets into the wall studs, securing the handrail firmly. The end of the handrail is bolted onto the top of the newel post, creating a seamless and sturdy connection. The entire handrail structure is now installed and stable.
What's used
Tools
- Assembled Handrail
- Clamps (optional)
- Cordless Drill
- Handrail Brackets
- Screws
About the full video
This video provides a detailed guide on installing a newel post, connecting handrail sections using a specialized railbolt system, and fitting metal balusters for a staircase. It covers initial measurements, precise cutting and notching of the newel post, robust attachment of the newel post to the concrete floor and knee wall, assembly of complex handrail turns, and the process of fitting balusters, ensuring a secure and stable railing system.
Step 5 of 6: Mount Handrail Assembly to Wall/Newel Post
Using the marked position as a guide, attach the handrail assembly. This typically involves screwing through the handrail and into wall studs or blocking, or into the newel post. Ensure the attachment is strong and stable.
Every video in How to Install a Handrail Return at the End of a Rail
Step 1: Mark Handrail Return Position
Step 2: Prepare Handrail End for Return
- 2:44–3:32 Cut Handrail Ends for Returns
- 4:05–5:23 Cut Handrail for Returns
- 2:44–3:21 Cut Handrail Ends with Miter Saw
Step 3: Fit and Test Handrail Return
- 4:24–5:10 Final Handrail Installation and Stability Check
- 5:43–5:52 Dry Fit Handrail over Balusters
- 5:22–5:43 Shape Handrail Return Ends
Step 4: Secure Handrail Return to Handrail
- 4:26–5:07 Gluing and Fastening the Return Piece
- 9:58–10:29 Fabricate and Install Handrail Return
- 3:32–4:24 Assemble Handrail End Returns
Step 5: Mount Handrail Assembly to Wall/Newel Post
- 0:54–1:00 Connect Handrail to Newel Post
- 12:33–14:45 Install Handrail to Newel Post and Wall (this video)
- 0:15–0:22 Attach Handrail to Newel Post
Step 6: Finish and Inspect
- 1:53–2:04 Final Sanding and Cleaning
- 0:28–0:36 Finishing and Sealing
- 0:43–0:46 Finishing Touches (Sanding, Finishing, Caulk)
How to Install a Handrail Return at the End of a Rail
This project outlines the steps to properly install a handrail return, which is the curved or angled section at the end of a handrail that transitions it back to the wall or newel post. This ensures a safe and aesthetically pleasing finish.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

