powered by

Install Top Handrail

From How to Install a Deck Stair Railing · Step 5 of 6 · Video by Game of Life

Showing 6:26–8:27 of the source video. Watch the full video with every moment.

What happens in this clip

Measure the required length for the 2x6 top handrail. If the railing section meets at a corner, use a miter saw to cut the 2x6 board at the appropriate angle for a clean joint. Position the handrail on top of the installed balusters and the upper 2x4 horizontal rail. To attach the handrail, toenail screws from the top surface of the 2x6 directly into the house structure or the main 4x4 posts at the ends of the section. Additionally, drive screws directly down through the top of the 2x6 handrail into the upper 2x4 horizontal rail, spacing them approximately every 20 inches. This secures the handrail firmly. Ensure all connections are tight and the handrail is level. If you made a mistake by leveling the 2x4s and the posts were uneven (as the video shows), remove and remount the top 2x4 to be level with the 4x4 posts to avoid gaps.

Goal: Attach the top 2x6 handrail to complete the railing section.

What's used

Tools

  • Impact Driver
  • Miter Saw
  • including miter cuts for corners.
  • Pressure-Treated 2x6 Board
  • Screws
  • Tape Measure

About the full video

This project guides you through replacing old, deteriorated porch railing and balusters with new pressure-treated wood. It covers planning, demolition of existing structures, precise cutting and fitting of new horizontal rails, balusters, and top handrails for both straight sections and stair railings.

Step 5 of 6: Attach Handrail

If a separate handrail is being installed over the top rail, measure and cut it to fit. Secure the handrail to the top rail using appropriate fasteners, such as specialized handrail screws or brackets, ensuring it is comfortable to grip and continuous along the entire length of the stairs.

Open this step in the guide

Every video in How to Install a Deck Stair Railing

  1. Step 1: Measure and Mark Stair Stringers

  2. Step 2: Cut and Attach Railing Posts

  3. Step 3: Install Top and Bottom Rails

  4. Step 4: Install Balusters (Spindles)

  5. Step 5: Attach Handrail

  6. Step 6: Final Inspection and Safety Check

How to Install a Deck Stair Railing

This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Top Handrail — How to Install a Deck Stair Railing | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.