Cut and Fit Handrail
From How to Install a Deck Stair Railing · Step 5 of 6 · Video by Jackson Woodturners

Showing 2:44–3:05 of the source video. Watch the full video with every moment.
What happens in this clip
Next, measure and cut the handrail. Use the same length and angle measurements determined in step 1, but this time apply them to the handrail material. Adjust your miter saw to the precise stair angle and cut both ends of the handrail. Once cut, carefully position the handrail onto the two temporary spindles and the newel posts. Ensure a snug fit and that it aligns correctly with the base rail and newel posts. Secure the handrail to the newel posts by driving screws using an impact driver. These screws should be countersunk for a neat finish.
Goal: Securely install the handrail on the staircase.
What's used
Tools
- Handrail
- Impact Driver DeWalt
- Miter Saw Bosch
- Screws
About the full video
This project guides you through the process of installing a wooden base rail, handrail, and spindles on a staircase. It involves precise measurements, angled cuts, and secure fitting of all components to create a functional and aesthetically pleasing balustrade.
Step 5 of 6: Attach Handrail
If a separate handrail is being installed over the top rail, measure and cut it to fit. Secure the handrail to the top rail using appropriate fasteners, such as specialized handrail screws or brackets, ensuring it is comfortable to grip and continuous along the entire length of the stairs.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail (this video)
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

