Final Inspection & Completion
From How to Install a Deck Stair Railing · Step 6 of 6 · Video by Downes Construction

Showing 0:54–0:59 of the source video. Watch the full video with every moment.
What happens in this clip
After all railing sections, including straight and angled stair railings, are installed and secured, perform a final inspection. Check that all posts are plumb, all rails are level or at the correct angle, and that all connections are secure. Ensure the entire railing system meets local building codes for height and spacing, and that there are no gaps too large for a 4-inch sphere to pass through.
Goal: Conduct a thorough final inspection to ensure all railing components are correctly installed, secure, and meet all relevant building codes.
What's used
Tools
- Level
- Measuring Tape
About the full video
This project provides step-by-step instructions for installing a Veranda rail system as part of a front porch rebuild. It covers measuring, cutting, and securing both straight and angled railing sections, including posts, rails, and spindles, while adhering to common building codes for height and spacing.
Step 6 of 6: Final Inspection and Safety Check
Test the stability of the railing by applying firm pressure to various points. Check that all screws and fasteners are tight and that there are no loose parts. Verify that the baluster spacing, railing height, and handrail graspability meet local building code requirements.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion (this video)
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

