Attach Balusters
From How to Install a Deck Stair Railing · Step 4 of 6 · Video by decks.com

Showing 1:01–1:29 of the source video. Watch the full video with every moment.
What happens in this clip
Install your balusters, ensuring that the space between them does not exceed 4 inches, as mandated by code for safety. To achieve even spacing, start by marking the center of the rail. Then, use a 2x4 spacer block as a guide, positioning it from the center mark and working outwards towards the posts. This method helps determine if a baluster or a space should fall exactly at the center and allows for adjustments to achieve the most even distribution. Once positioned, simply screw each baluster to both the top and bottom rails using a 2 1/2-inch trim screw.
Goal: Install Vertical Balusters with Proper Spacing
What's used
Tools
- 2x4 Spacer Block
- Caliper
- Drill/Driver DeWalt
- Pencil/Marker
- Tape Measure
Materials
- 2 1/2-inch Trim Screws
- Balusters
About the full video
This project provides a comprehensive guide on constructing and installing wood guard railings for a deck. It covers cutting and preparing posts, attaching them securely to the deck structure, installing horizontal rails, precisely spacing and securing balusters, and finally adding a decorative top cap. The instructions also touch on relevant building codes for rail height and baluster spacing, including specifics for stair railings.
Step 4 of 6: Install Balusters (Spindles)
Measure the distance between the top and bottom rails to determine the length of the balusters. Cut the balusters to size. Attach the balusters to the top and bottom rails using screws or specialized baluster connectors. Ensure the spacing between balusters is no more than 4 inches on center to meet code requirements.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters (this video)
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

