powered by

Replacing Old Porch and Deck Railing

Video by Game of Life · 1 moment used in Oak Valley Designs's DIY guides · 9:46 long

Moments in this video

  1. 6:26–8:27 Install Top Handrail From How to Install a Deck Stair Railing, Step 5: Attach Handrail

    Measure the required length for the 2x6 top handrail. If the railing section meets at a corner, use a miter saw to cut the 2x6 board at the appropriate angle for a clean joint. Position the handrail on top of the installed balusters and the upper 2x4 horizontal rail. To attach the handrail, toenail screws from the top surface of the 2x6 directly into the house structure or the main 4x4 posts at the ends of the section. Additionally, drive screws directly down through the top of the 2x6 handrail into the upper 2x4 horizontal rail, spacing them approximately every 20 inches. This secures the handrail firmly. Ensure all connections are tight and the handrail is level. If you made a mistake by leveling the 2x4s and the posts were uneven (as the video shows), remove and remount the top 2x4 to be level with the 4x4 posts to avoid gaps.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Replacing Old Porch and Deck Railing — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.