Measure and Mark Handrail Height
From How to Install a Deck Stair Railing · Step 1 of 6 · Video by normalguydiy

Showing 0:13–1:16 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by determining the appropriate height for your handrail. Research local building codes for standard handrail heights; typically, this is between 32 to 34 inches from the nose (front edge) of each stair tread to the top of the handrail. Using a level or a long straight edge, measure up from the nose of several stairs, starting from the bottom and extending to the top. Mark these points on the wall. Then, connect these marks with a pencil to create a continuous angled line that will serve as the guide for the top edge of your handrail.
Goal: Establish the correct and safe height for the handrail along the stairway.
What's used
Tools
- Level or Straight Edge
- Laser level
- Pencil
- Tape Measure
About the full video
This DIY project provides step-by-step instructions for installing a simple handrail on a stairway. It covers determining the correct height, securely mounting brackets into wall studs, cutting and assembling handrail end returns, and finally attaching and checking the stability of the handrail.
Step 1 of 6: Measure and Mark Stair Stringers
Using a tape measure and a pencil, mark the desired railing height on the inside face of each stair stringer. Typically, this height is around 36 inches from the nose of the tread, but it should be verified against local building codes. Ensure the marks are level and consistent across all stringers.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height (this video)
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

