Install Top and Bottom Rails
From How to Install a Deck Stair Railing · Step 3 of 6 · Video by DIY Network

Showing 0:51–1:08 of the source video. Watch the full video with every moment.
What happens in this clip
Now, prepare and install the top and bottom rails that will run horizontally between the posts. First, measure the distance between the installed posts to determine the length needed for these rails. Use a miter saw to cut the rail pieces to size. To ensure even installation, use small wood blocks as spacers to set the desired height for the bottom rail. Nail the bottom rail in place first, then attach the top rail, making sure it is flush with the top of the posts.
Goal: Attach horizontal rails between the deck posts
What's used
Tools
- Miter Saw DeWalt
- Nail Gun
- Tape Measure
Materials
- Nails
- Wood Rails
- Wood Spacers
About the full video
This project provides a step-by-step guide on how to install a sturdy and code-compliant deck railing. It covers cutting and preparing posts, securely attaching them to the deck frame, installing horizontal top and bottom rails, adding vertical balusters with proper spacing, and finally, fitting a decorative cap rail for a finished look.
Step 3 of 6: Install Top and Bottom Rails
Measure the distance between the installed railing posts. Cut the top and bottom railing boards to fit snugly. Attach the top rail to the tops of the posts using screws or specialized connectors. Attach the bottom rail at the appropriate height below the top rail, ensuring it is parallel and secure.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails (this video)
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

