Install Balusters
From How to Install a Deck Stair Railing · Step 4 of 6 · Video by DIY Network

Showing 1:10–1:35 of the source video. Watch the full video with every moment.
What happens in this clip
Next, you'll install the balusters, which are the vertical pieces between the top and bottom rails. These are typically made from 2x2 lumber and can be bought pre-cut. The number of balusters and their spacing depend on the size of the balusters and the distance between your posts. Code generally requires a gap of no more than 4 inches for safety. Once you've determined your spacing, mark the locations on the rails, and then nail the balusters to both the top and bottom railings.
Goal: Install vertical balusters between the rails with proper spacing
What's used
Tools
- Miter Saw DeWalt
- Circular saw
- Nail Gun
- Pencil
- Tape Measure
Materials
- Balusters
- Nails
About the full video
This project provides a step-by-step guide on how to install a sturdy and code-compliant deck railing. It covers cutting and preparing posts, securely attaching them to the deck frame, installing horizontal top and bottom rails, adding vertical balusters with proper spacing, and finally, fitting a decorative cap rail for a finished look.
Step 4 of 6: Install Balusters (Spindles)
Measure the distance between the top and bottom rails to determine the length of the balusters. Cut the balusters to size. Attach the balusters to the top and bottom rails using screws or specialized baluster connectors. Ensure the spacing between balusters is no more than 4 inches on center to meet code requirements.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters (this video)
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

