Measure and Cut Top and Bottom Rails
From How to Install a Deck Stair Railing · Step 3 of 6 · Video by Wickes

Showing 2:16–2:28 of the source video. Watch the full video with every moment.
What happens in this clip
Before assembling the railing section, measure the exact gap between the installed deck posts. Use a measuring tape and pencil to mark the precise length on both the top and bottom rails, then use a hand saw or circular saw to cut them to fit perfectly between the posts. Once cut, smooth any rough edges with sandpaper.
Goal: Prepare rails to fit between posts
What's used
Tools
- Circular Saw Wickes
- Hand Saw
- Measuring Tape Wickes
- Pencil
- Safety Glasses
- Safety Gloves
- Sandpaper
- Set Square Wickes
Materials
- Deck Handrails
About the full video
This project details the process of assembling and installing modern deck railings, covering everything from preparing and securing deck posts to constructing the rail and spindle sections, and finally attaching the completed railing to the deck structure for enhanced safety and aesthetic appeal.
Step 3 of 6: Install Top and Bottom Rails
Measure the distance between the installed railing posts. Cut the top and bottom railing boards to fit snugly. Attach the top rail to the tops of the posts using screws or specialized connectors. Attach the bottom rail at the appropriate height below the top rail, ensuring it is parallel and secure.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails (this video)
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

