Install Handrail
From How to Install a Deck Stair Railing · Step 5 of 6 · Video by Nuvo Iron

Showing 4:49–5:12 of the source video. Watch the full video with every moment.
What happens in this clip
If you decide to use a handrail, measure your chosen handrail material (either a Nuvo Decorative Pressure Treated Top Rail or a 2x4/deck board) in the same manner you measured your top and bottom rails, to ensure an accurate fit over the installed railing section. Cut your handrail to fit the determined length and angle using a saw. Then, carefully attach the handrail to the top of your railing system using fasteners that are appropriate for the thickness of your material. The video suggests using #8 fasteners that are 2 1/2 inches in length.
Goal: Attach the handrail to the top of the installed railing section
What's used
Tools
- Drill
- Fasteners (#8
- 2 1/2 inches)
- Handrail Material Nuvo Decorative Pressure Treated Top Rail (or 2x4/deck board)
- Saw
- Screwdriver Bit
- Tape Measure
About the full video
This project provides a comprehensive guide on how to install Nuvo Iron round balusters for stair railings. It covers preparing the rails by measuring and cutting, marking for baluster connectors, assembling the balusters and rails, installing the railing section to posts, and finally adding a handrail and post accessories, all while adhering to safety and building code standards.
Step 5 of 6: Attach Handrail
If a separate handrail is being installed over the top rail, measure and cut it to fit. Secure the handrail to the top rail using appropriate fasteners, such as specialized handrail screws or brackets, ensuring it is comfortable to grip and continuous along the entire length of the stairs.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail (this video)
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

