Measure and Mark Railing Height and Studs
From How to Install a Deck Stair Railing · Step 1 of 6 · Video by Viewrail

Showing 0:02–0:15 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by measuring the desired height for your handrail. Following local building codes, measure straight up from the front of your first and last step, and make a mark with a pencil. To ensure a straight line between these marks, use a laser level to project a line or snap a chalk line. Next, use a stud finder to locate the wall studs along this marked line. Mark the locations of these studs with a pencil, as these will be the secure mounting points for your handrail brackets.
Goal: Determine handrail line and secure mounting points
What's used
Tools
- Laser Level Ryobi
- Long straightedge and a spirit level
- Pencil
- Stud Finder
- Tape Measure
About the full video
This project guides you through the installation of a wall-mounted Quickslide handrail. It covers marking the handrail's height and stud locations, attaching the mounting brackets to the wall, assembling the handrail onto the brackets, and finishing with end plugs to provide a secure and aesthetically pleasing handrail for stairs.
What's said in this clip
<b>"How to Install Wall-Mounted Quick </b> <b> Slide Handrail in 60 Seconds".</b> Following your local code, measure straight up from the front of your first and last step and make your mark. Find a straight line between these two marks with a laser level or by snapping a chalk line. Use a stud finder and mark the locations of your studs on this line, keeping your brackets no more than four feet apart. Assemble the wall-mount brackets with the provided screws. Angle the brackets to the angle of the chalk line. Mount the brackets to your wall.
Automatically transcribed from the source video.
Step 1 of 6: Measure and Mark Stair Stringers
Using a tape measure and a pencil, mark the desired railing height on the inside face of each stair stringer. Typically, this height is around 36 inches from the nose of the tread, but it should be verified against local building codes. Ensure the marks are level and consistent across all stringers.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height
- 0:02–0:15 Measure and Mark Railing Height and Studs (this video)
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
Questions about How to Install a Deck Stair Railing
What's the trickiest part of installing deck stair railings, especially for a beginner?
Getting accurate angle cuts for the top and bottom rails to match the stair pitch is often the most challenging aspect. Double-check your measurements and angles carefully, and make test cuts on scrap material. Ensuring all posts are plumb, level, and securely fastened is also crucial for overall stability.
Are there any specialized tools I'll absolutely need for this project beyond basic hand tools?
While basic tools are essential, a good miter saw with a sharp blade is critical for precise angle cuts on the rails and posts. A reliable level and a digital angle finder will also greatly assist in achieving accurate angles and ensuring posts are plumb and level, contributing to a professional and safe installation.
How do I ensure my railing posts and handrail are truly secure and won't become wobbly over time?
Proper fastening is key for long-term stability. Use structural wood screws or lag bolts, such as the SPAX Powerlags mentioned, that are long enough to anchor posts firmly into substantial framing members or stair stringers. For the handrail, ensure brackets are securely fastened to solid blocking or framing, not just surface decking.
Can I mix and match different railing materials, like using wood balusters with composite rails?
Yes, mixing materials is often possible and can create unique looks, provided all components are rated for outdoor use and properly installed. Ensure all connections are compatible and secure, and always verify that the combined system meets local building code requirements for strength, durability, and safety.
What is the typical time commitment and difficulty for a beginner undertaking this project?
This project is rated as beginner difficulty with an estimated time of 8 hours, but it can vary based on your experience and the complexity of your stairs. Take your time with measurements and cuts, as rushing can lead to mistakes. Having a helper for holding longer pieces can also significantly speed up the process and improve accuracy.
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

