Determine and Mark Handrail Height
From How to Install a Deck Stair Railing · Step 1 of 6 · Video by BYOT

Showing 1:30–2:18 of the source video. Watch the full video with every moment.
What happens in this clip
Using a tape measure, identify the proper height for the handrail's top edge, which must be between 34 and 38 inches from the nose of the steps, according to building codes. For this project, a height of 36 inches is chosen as the midpoint. Mark this height on the wall at the front edge of both the bottom and top steps. Utilize a 6-foot level to ensure these marks are vertically aligned with the respective step edges.
Goal: Measure and mark the appropriate height for the handrail, ensuring it complies with local building codes, typically between 34 and 38 inches from the step nosing.
What's used
Tools
- 6-foot Level
- Marker
- Tape Measure
Materials
- Painter's Tape
About the full video
This video guides viewers through the process of installing a modern, powder-coated steel handrail on an exterior wall, emphasizing code compliance, secure fastening using toggle bolt anchors, and aesthetic finishing touches. The project highlights careful measurement, stud location, and precise installation techniques to ensure both safety and a polished look.
What's said in this clip
let's get this thing installed now i have featured this front entryway in a number of different projects already on my channel however i have not finished it out yet so i'm going to be working on trying to completely renovate this entire space now with this being a hand drill it needs to be decode which basically means the height of the handrail top needs to be between 34 and 38 inches now i'm setting at 36 just because why not just be right in the middle now the easiest way to account for the proper height and angle is taking your tape measure and at the very front lip of the bottom step as well as the top step you measure 36 inches then i proceed to taking my six foot level and just making sure that that is properly straight from the very front of the step lip
Automatically transcribed from the source video.
Step 1 of 6: Measure and Mark Stair Stringers
Using a tape measure and a pencil, mark the desired railing height on the inside face of each stair stringer. Typically, this height is around 36 inches from the nose of the tread, but it should be verified against local building codes. Ensure the marks are level and consistent across all stringers.
Every video in How to Install a Deck Stair Railing
Step 1: Measure and Mark Stair Stringers
- 0:13–1:16 Measure and Mark Handrail Height
- 1:30–2:18 Determine and Mark Handrail Height (this video)
- 0:02–0:15 Measure and Mark Railing Height and Studs
Step 2: Cut and Attach Railing Posts
- 0:30–0:41 Install Stair Railing Posts
- 3:39–4:33 Install Newel Posts Securely
- 2:45–3:58 Install Stair Handrails and Cut Posts
Step 3: Install Top and Bottom Rails
- 0:51–1:08 Install Top and Bottom Rails
- 0:49–1:01 Install Top and Bottom Rails
- 2:16–2:28 Measure and Cut Top and Bottom Rails
Step 4: Install Balusters (Spindles)
- 1:01–1:29 Attach Balusters
- 1:10–1:35 Install Balusters
- 3:09–4:49 Install Balusters
Step 5: Attach Handrail
- 4:49–5:12 Install Handrail
- 2:44–3:05 Cut and Fit Handrail
- 6:26–8:27 Install Top Handrail
Step 6: Final Inspection and Safety Check
- 0:16–0:28 Perform Final Inspection and Safety Check
- 0:22–0:25 Final Visual Inspection
- 0:54–0:59 Final Inspection & Completion
How to Install a Deck Stair Railing
This project outlines the steps for installing a railing system for deck stairs, ensuring safety and code compliance. It covers measuring, cutting, assembling, and securely attaching railing components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

