Break Off the Screw Head
From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors · Step 5 of 6 · Video by Home Rapid Repair

Showing 3:48–4:38 of the source video. Watch the full video with every moment.
What happens in this clip
Once the screw is fully driven, its head will be flush with the carpet surface. The next step is to break off the screw head. The carpet depth gauge has a small notch designed specifically for this. Align this notch over the small, visible screw head. Firmly press down on the depth gauge and then wiggle it left and right. The screw will snap off cleanly at its pre-designed score mark, located about a fifth of an inch below the subfloor. This ensures that no part of the screw head is felt or seen through the carpet, leaving a completely smooth and invisible repair. You can then gently brush the carpet fibers over the tiny hole to further conceal it.
Goal: Remove the visible screw head for an invisible repair
What's used
Tools
- Carpet Depth Gauge Squeeeeek No More
About the full video
This project provides a detailed guide on how to eliminate annoying squeaks in carpeted floors using a specialized Squeeeeek No More kit. The process involves identifying the direction of floor joists, precisely locating them, drilling exploratory holes to confirm joist presence, and then installing unique self-snapping screws through the carpet and subfloor into the joists. The kit utilizes special depth gauges and screws designed to break off below the carpet surface, leaving no visible or tactile evidence of the repair.
What's said in this clip
feel it. Now, the next step, if you look at your depth gauge, it has this little notch right here. That's designed to go over the scored screw so it can snap in the right position. And then you're going to wiggle left to right. And the score snaps off. Let me show you on a new screw. It snaps right there where the manufacturer designed it to snap off, leaving the threads to hold the subfloor firmly to the joist. >> [music] >> Go ahead and feel that. There's nothing to feel. It's completely soft. That screw is set beneath the surface of your carpet and your padding so you feel nothing. >> [music] >> Use as many screws as you need to stop those squeaks. This device is patented and manufactured in the United States of America. You keep the device as long as you need cuz you might have more squeaks in the future. Now, this video was only
Automatically transcribed from the source video.
Step 5 of 6: Break Off Screw Heads (if applicable)
Many squeak repair kits include screws with heads designed to break off at a specific point. This leaves a clean finish and prevents the screw head from being a tripping hazard or visible. Once the screw is driven in, use needle-nose pliers or the tool provided in the kit to grip the screw head and snap it off. The aim is for the remaining shaft to be flush with or slightly below the carpet surface.
Every video in How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors
Step 1: Identify Squeak Location
- 0:00–0:17 Identify Squeak Location
- 0:00–0:09 Locate the Squeak
- 0:00–0:30 Locate Squeak and Assess Access
Step 2: Prepare the Squeak Repair Kit
Step 3: Drill Pilot Holes
- 0:15–0:24 Drill a Pilot Hole
- 4:17–5:45 Fix from Above: Use Trim Head Screws
- 4:08–4:43 Pre-Drill Pilot Holes
Step 4: Install Repair Screws
- 1:25–3:50 Install Specialized Repair Screws
- 2:56–3:28 Install Breakaway Repair Screws
- 2:48–3:49 Drive and Snap Off the Screw
Step 5: Break Off Screw Heads (if applicable)
- 3:48–4:38 Break Off the Screw Head (this video)
- 4:49–5:22 Snap Off Screw Heads
- 3:50–4:00 Break Off Screw Heads
Step 6: Test the Repaired Area
- 8:01–8:29 Test Repaired Floor
- 3:57–4:25 Repeat for All Squeaky Areas
- 0:38–0:48 Confirm Repair and Concealment
How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors
Outline for using a squeak-repair kit on carpeted stairs and floors to eliminate annoying squeaking sounds.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

