Secure Floorboard and Countersink
From How to Fix a Squeaky Floor on a Stair Landing · Step 3 of 5 · Video by The Home Improvements Channel UK

Showing 6:00–7:07 of the source video. Watch the full video with every moment.
What happens in this clip
With the pilot holes pre-drilled and utilities confirmed clear, drive the chosen screws (e.g., 45-50mm) through the floorboard and into the joist or blocking underneath. Ensure the screws are driven firmly to pull the floorboard down tightly, eliminating any movement or squeaking. Optionally, use a countersink bit or ensure the screws have self-countersinking heads so they sit flush with or slightly below the surface of the floorboard. This creates a smooth finish that won't interfere with future flooring installations like carpet or laminate. The video demonstrates the secure fastening of the board, showing how it eliminates the initial rockiness.
Goal: Fasten floorboards securely to eliminate squeaks and create a smooth surface.
What's used
Tools
- Countersink bit
- Drill/Impact Driver DeWalt
- Screwdriver bit
About the full video
This project provides detailed instructions on how to properly and safely fix squeaky or loose floorboards. It emphasizes the crucial step of inspecting underneath the floor for pipes and cables to avoid costly damage, explains how to provide support for unstable boards, details the selection of appropriate screws and fixing patterns, and highlights the importance of pre-drilling pilot holes to ensure a secure and long-lasting repair.
Step 3 of 5: Secure Loose Floorboards
This step addresses squeaks caused by movement between the floorboard and the subfloor, or between the subfloor and the joists. By fastening the layers together, you eliminate the potential for shifting and rubbing. Predrilling pilot holes can help prevent the wood from splitting and make driving the screws easier. Countersinking the screw heads slightly will allow them to be hidden later.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
- 0:36–0:52 Secure Subfloor to Joists with Screws
- 6:00–7:07 Secure Floorboard and Countersink (this video)
- 0:39–0:44 Fix Squeaks Between Floor and Subfloor (Access from Below)
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

