Test and Verify Results
From How to Fix a Squeaky Floor on a Stair Landing · Step 5 of 5 · Video by Stop Creak

Showing 0:23–0:28 of the source video. Watch the full video with every moment.
What happens in this clip
After applying the solution and allowing it a moment to work, retest the treated area by walking on it and applying pressure, similar to the first step. The goal is to confirm that the creaking noise has been eliminated. The video shows the demonstrator stepping on the previously creaking floorboards, and no sound is heard, indicating the treatment was successful.
Goal: Confirm the elimination of floor creaks
About the full video
This DIY project demonstrates a simple and effective method to eliminate creaking noises from laminate or hardwood floors. The process involves identifying the source of the creak, applying a specialized liquid solution to the floorboard seams, and then testing to ensure the creaking has stopped, resulting in a quieter and more stable floor.
Step 5 of 5: Test and Finish
The final step is to confirm that the repair was successful. Test the area thoroughly by walking on it in different spots and with varying pressure. If the squeak is gone, clean up any dust or debris from the repair process. If the problem isn't fixed, it may require a more in-depth diagnosis or the assistance of a professional carpenter.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results (this video)
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

