Insert Shims to Fill Gaps
From How to Fix a Squeaky Floor on a Stair Landing · Step 4 of 5 · Video by RealHouseDIY

Showing 0:05–0:10 of the source video. Watch the full video with every moment.
What happens in this clip
Once the gaps between the subfloor and joists are located, take the shims and gently insert them into these gaps. The shims shown in the video are black, perforated, and appear to be made of rubber or a composite material. Push or tap the shims in until they are snug, effectively closing the gap and preventing movement. Continue this process along the length of the identified gap until the squeak disappears when pressure is applied to the floor above. The shims should provide firm contact but avoid overtightening, which could cause stress on the subfloor or joist.
Goal: Eliminate the gap between the subfloor and joist using shims to stop the squeak.
What's used
Tools
- Rubber Mallet
- Shims Unknown (appears to be rubber or composite)
- Plastic shims
About the full video
This DIY project provides a quick and effective solution for squeaky floors by addressing the common cause: a gap between the subfloor and the floor joist. The method involves inserting shims into these gaps to eliminate movement and noise, with the added benefit of easy future adjustments.
Step 4 of 5: Reinforce Subfloor or Joists
This is a more involved repair that requires access to the underside of the floor. Shimming fills voids that allow movement, while blocking (or bracing) adds structural rigidity to the joists themselves, preventing excessive flex. Ensure any shims are made of hardwood and are snug, and that blocking is securely fastened to the joists.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps (this video)
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

