Locate Squeaky Floor Section
From How to Fix a Squeaky Floor on a Stair Landing · Step 1 of 5 · Video by Jim Riesberg

Showing 0:13–0:20 of the source video. Watch the full video with every moment.
What happens in this clip
To identify the precise location of the squeak, have another person walk on the floor directly above the area you suspect is squeaking. From below, observe the floor for any movement against the joist or listen carefully to pinpoint the exact source of the squeak. Once located, instruct the person to stand on that spot to firmly hold the floor to the joist, which will assist with the subsequent installation steps.
Goal: Pinpoint the exact source of the floor squeak.
About the full video
This project details how to permanently fix squeaky floors using the 'Squeak Relief' system. It involves identifying the squeak's location, installing a specialized aluminum bracket with a micro shim between the floor and joist, and then securing it with a pin and two different sized screws. The product is designed for easy installation and durability, suitable for various floor types and joist materials.
Step 1 of 5: Locate Squeak Source
The first critical step is to accurately identify where the squeak is coming from. This usually involves friction between the floorboards themselves, the floorboards and the subfloor, or the subfloor and the joists. By systematically walking the area and applying pressure, you can often narrow down the source to a specific board or small area. Having a second person can be very helpful to confirm the location from different angles.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section (this video)
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

