How To Fix A Loose Or Squeaky Floor Board -Watch This Before #diy #homeimprovement #flooring #howto
Video by The Home Improvements Channel UK · 2 moments used in Oak Valley Designs's DIY guides · 7:08 long

Moments in this video
- 4:08–4:43 Pre-Drill Pilot Holes
From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 3: Drill Pilot Holes
Before driving any screws, it is essential to pre-drill pilot holes through the floorboard. This prevents the wood from splitting, especially in older or dry timber, and ensures the screw maintains its full clamping force. Drill a pilot hole slightly smaller than the screw's shank at each marked fixing point. The video demonstrates this process, illustrating where the pilot holes should be placed (e.g., in the center of the joist) and then later explicitly explains how pilot holes prevent splitting and maintain effective clamping force. The video also briefly shows a demonstration of what happens when a long screw is driven without prior inspection, serving as a visual warning against improper technique.
- 6:00–7:07 Secure Floorboard and Countersink
From How to Fix a Squeaky Floor on a Stair Landing, Step 3: Secure Loose Floorboards
With the pilot holes pre-drilled and utilities confirmed clear, drive the chosen screws (e.g., 45-50mm) through the floorboard and into the joist or blocking underneath. Ensure the screws are driven firmly to pull the floorboard down tightly, eliminating any movement or squeaking. Optionally, use a countersink bit or ensure the screws have self-countersinking heads so they sit flush with or slightly below the surface of the floorboard. This creates a smooth finish that won't interfere with future flooring installations like carpet or laminate. The video demonstrates the secure fastening of the board, showing how it eliminates the initial rockiness.
Guides that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

