Final Check and Confirmation
From How to Fix a Squeaky Floor on a Stair Landing · Step 5 of 5 · Video by RealHouseDIY

Showing 9:40–9:57 of the source video. Watch the full video with every moment.
What happens in this clip
After inserting the shims, return upstairs and walk across the area where the squeak was previously present. Confirm that the squeaking sound has been eliminated. The presenter demonstrates walking over the previously squeaky spot, showing that it is now silent. This confirms the successful resolution of the floor squeak.
Goal: Verify that the floor squeak has been successfully eliminated.
About the full video
This DIY project provides a comprehensive guide to identifying and fixing squeaky floors, addressing common causes like buckled finished flooring and gaps between subfloors and joists. The instructions cover techniques for fixing squeaks from above (using screws) and from below (using shims), with a detailed demonstration of applying shims from a basement to eliminate a specific floor squeak.
Step 5 of 5: Test and Finish
The final step is to confirm that the repair was successful. Test the area thoroughly by walking on it in different spots and with varying pressure. If the squeak is gone, clean up any dust or debris from the repair process. If the problem isn't fixed, it may require a more in-depth diagnosis or the assistance of a professional carpenter.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation (this video)
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

