Fix Squeaks Between Floor and Subfloor (Access from Below)
From How to Fix a Squeaky Floor on a Stair Landing · Step 3 of 5 · Video by Lowe's Home Improvement

Showing 0:39–0:44 of the source video. Watch the full video with every moment.
What happens in this clip
For squeaks caused by movement between the finished floor and the subfloor, and if you have access from below, you can secure these layers together. Using a cordless drill and a short wood screw, attach the subfloor to the underside of the finished floor. Ensure the screw is short enough not to penetrate through the top surface of your finished floor. This method helps to pull the two layers tightly together, eliminating the movement that causes the squeak.
Goal: Secure the subfloor to the finished floor using wood screws
What's used
Tools
- Cordless Drill
- Manual screwdriver (for small number of screws)
- Short Wood Screws
About the full video
This project provides instructions on how to effectively fix squeaky floors by addressing the movement between floor components. It covers solutions for situations where you have access to the floor joists from below, as well as methods for repairing squeaks from above the finished floor, whether it's hardwood, laminate, or carpeted.
Step 3 of 5: Secure Loose Floorboards
This step addresses squeaks caused by movement between the floorboard and the subfloor, or between the subfloor and the joists. By fastening the layers together, you eliminate the potential for shifting and rubbing. Predrilling pilot holes can help prevent the wood from splitting and make driving the screws easier. Countersinking the screw heads slightly will allow them to be hidden later.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
- 0:36–0:52 Secure Subfloor to Joists with Screws
- 6:00–7:07 Secure Floorboard and Countersink
- 0:39–0:44 Fix Squeaks Between Floor and Subfloor (Access from Below) (this video)
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

