Locate and Mark the Squeaky Area
From How to Fix a Squeaky Floor on a Stair Landing · Step 1 of 5 · Video by Mad Buildz

Showing 0:55–1:16 of the source video. Watch the full video with every moment.
What happens in this clip
To accurately pinpoint the source of the squeak, place a piece of tape in the general area where you hear the floor squeaking. Then, gradually walk around and apply pressure to the floor, listening for the loudest point of the squeak. Once found, reposition the tape to mark the exact spot where the squeak is most prominent. This marked spot will guide where to investigate for the joist and drive the screws.
Goal: Pinpoint the exact location of the floor squeak
What's used
Materials
- Masking Tape
- Blue tape
About the full video
This project provides detailed instructions on how to fix squeaky hardwood floors using a specialized kit called 'Squeak No More'. The process involves identifying the loudest squeak, locating floor joists, drilling pilot holes, driving scored screws to secure the subfloor to the joists, and then filling the resulting holes with wood putty for a finished look.
Step 1 of 5: Locate Squeak Source
The first critical step is to accurately identify where the squeak is coming from. This usually involves friction between the floorboards themselves, the floorboards and the subfloor, or the subfloor and the joists. By systematically walking the area and applying pressure, you can often narrow down the source to a specific board or small area. Having a second person can be very helpful to confirm the location from different angles.
Every video in How to Fix a Squeaky Floor on a Stair Landing
Step 1: Locate Squeak Source
- 0:00–0:09 Locate the Squeak
- 0:55–1:16 Locate and Mark the Squeaky Area (this video)
- 0:13–0:20 Locate Squeaky Floor Section
Step 2: Test Lubrication Method
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 0:52–2:39 Apply Powder
- 0:45–0:54 Apply Talcum Powder to Squeaky Area
Step 3: Secure Loose Floorboards
Step 4: Reinforce Subfloor or Joists
- 2:59–4:16 Fix from Below: Use Shims
- 5:35–7:36 Option 1: Shim the Joist
- 0:05–0:10 Insert Shims to Fill Gaps
Step 5: Test and Finish
- 9:40–9:57 Final Check and Confirmation
- 0:23–0:28 Test and Verify Results
- 0:38–0:54 Verify and Clean Up
How to Fix a Squeaky Floor on a Stair Landing
This project outlines the steps to diagnose and fix a squeaky floor on a stair landing. It involves identifying the source of the squeak, which is typically friction between floorboards, subfloor, or joists, and then applying a solution to eliminate the noise. Solutions can range from simple lubrication to more involved fastening.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

