Remove Old Light Fixture and Bracket
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 2 of 6 · Video by Guy of All Trades

Showing 0:38–1:17 of the source video. Watch the full video with every moment.
What happens in this clip
With the power confirmed off, access the wiring by removing the decorative cover plate. For this fixture, thumb screws secured the plate; however, other fixtures may use different fasteners. Once the plate is removed, the electrical connections (typically twisted wire nuts for hot, neutral, and ground) become visible. Disconnect these wires and carefully remove the old fixture. Next, remove the old mounting bracket, which is typically secured to the electrical box with flat-head or Phillips-head screws. This bracket will be replaced by the new fixture's custom mounting hardware.
Goal: Carefully remove the cover plate of the old light fixture by unscrewing fasteners, disconnect the electrical wiring (hot, neutral, and ground), and then detach the old mounting bracket from the ceiling's electrical box.
What's used
Tools
- Screwdriver (Flat-head or Phillips)
About the full video
This video provides detailed instructions on how to remove an old, dated light fixture and install a new, modern statement light fixture. The process includes safely disconnecting power, removing the old fixture and bracket, installing a new mounting bracket with proper grounding, connecting the new fixture's electrical wires, mounting the fixture, and finally installing glass shades and LED bulbs for a contemporary look.
Step 2 of 6: Remove the old light fixture
Once power is confirmed off, inspect how the current fixture is attached. Most flush-mount fixtures are held by screws, clips, or a threaded center nut. Remove any decorative covers or shades. Unscrew or unclip the fixture from the mounting bracket. Support the fixture as you disconnect the wiring. Remove wire nuts connecting the fixture wires to the house wiring, and carefully separate the wires.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket (this video)
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

