Turn Off Power & Remove Old Fixture
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 2 of 6 · Video by HouseImprovements

Showing 0:11–0:30 of the source video. Watch the full video with every moment.
What happens in this clip
The first critical step is to ensure electrical safety by turning off the power to the light fixture at the main electrical panel (breaker box). The presenter emphasizes that turning off only the light switch is not sufficient, as power can still be present at the fixture. With the power confirmed off, use a screwdriver to remove the screws holding the old flush mount fixture to the ceiling, detaching it from the electrical box.
Goal: Safely remove the existing flush mount light fixture.
What's used
Tools
- Main Electrical Panel (Breaker Box)
- Screwdriver
About the full video
This video demonstrates how to replace an old flush mount ceiling light fixture with a new, more contemporary one. The process involves safely disconnecting the old fixture, installing a new mounting bracket, making proper electrical connections (including ensuring a ground wire is present), securing the new fixture base, installing light bulbs, and finally attaching the glass shade.
Step 2 of 6: Remove the old light fixture
Once power is confirmed off, inspect how the current fixture is attached. Most flush-mount fixtures are held by screws, clips, or a threaded center nut. Remove any decorative covers or shades. Unscrew or unclip the fixture from the mounting bracket. Support the fixture as you disconnect the wiring. Remove wire nuts connecting the fixture wires to the house wiring, and carefully separate the wires.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture (this video)
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

