Mount New Fixture Base
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 5 of 6 · Video by fordummies

Showing 1:04–1:17 of the source video. Watch the full video with every moment.
What happens in this clip
Once the wires are securely connected, gently push them back into the electrical box. Then, raise the new fixture's base plate and align it with the mounting strap that is attached to the electrical box. Screw the new bolts (usually provided with the fixture) through the fixture's base plate and into the mounting strap until the fixture is firmly secured against the ceiling. Ensure it is flush and stable.
Goal: Securely fasten the new light fixture to the ceiling.
What's used
Tools
- Mounting strap
- New bolts
- New fixture base plate
About the full video
This project provides step-by-step instructions on how to safely replace an existing ceiling light fixture with a new one. It covers crucial safety precautions like turning off power and testing wires, disconnecting the old fixture, connecting the new wiring, and finally mounting the new fixture and restoring power.
Step 5 of 6: Mount the new fixture and attach covers
Carefully tuck the wired connections into the electrical box. Align the new fixture with the mounting bracket and secure it according to the manufacturer's instructions. This usually involves screws or a twist-lock mechanism. Once the fixture is securely mounted, attach any decorative covers, shades, or diffusers.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base (this video)
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

