Connect New Light Fixture Wiring
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 4 of 6 · Video by Bootstrappin'

Showing 2:46–3:50 of the source video. Watch the full video with every moment.
What happens in this clip
Now it's time to connect the new light fixture's wiring. Identify the wires from the ceiling: typically black (hot), white (neutral), and bare copper (ground). On the new fixture, you'll also have corresponding wires. Connect the hot wire (often black or red from the ceiling, black from the fixture) to the corresponding hot wire using a wire nut, twisting clockwise until secure. Connect the neutral wires (white to white) similarly with a wire nut. For the ground wire, wrap the bare copper wire from the ceiling around the green grounding screw on the mounting strap in a clockwise direction, then connect it to the new fixture's ground wire (if present) and tighten the screw. For added security, you can wrap electrical tape around each wire nut connection. Always ensure connections are tight and no bare wire is exposed. If your home has older two-conductor wiring without a separate ground, the fixture's ground wire should be connected to the mounting strap and the electrical box itself, which acts as the ground.
Goal: Establish electrical connections for the new fixture.
What's used
Tools
- Electrical Tape
- Screwdriver
- Wire Nuts
About the full video
This video provides a comprehensive guide on how to safely replace an existing flush mount light fixture with a new one. The process covers essential safety steps, including disabling power, removing the old fixture, installing a new mounting bracket, making correct electrical wiring connections (hot, neutral, and ground), and finally, installing the new fixture and testing its operation.
What's said in this clip
is of course the most fun part because we simultaneously kind of have to hold it up while wiring it and then actually secure it so in my case this red wire is the hot wire because this is connected to a three-way switch I'm gonna start with that I'm gonna follow that up with the white or neutral wire and hook it up to this mess of wires right here just reusing same old wire nuts right yank on the both of them make sure they don't repair it nice and secure now let's do this ground strap here wrap it around this green screw make sure we wrap it such that it doesn't unravel while we tighten it so wrap it in a clockwise fashion and tighten the ground screw now if you have an older home that that only does two conductor wiring throughout the house this grounding might not actually do jack so you have to check with your home and make sure that there's actual grounding at this box now then I
Automatically transcribed from the source video.
Step 4 of 6: Wire the new light fixture
Match the wires from the new fixture to the wires from the ceiling electrical box. Typically, black (hot) connects to black, white (neutral) connects to white, and green or bare copper (ground) connects to green or bare copper. Secure each connection by twisting a wire nut tightly onto the joined wires. Ensure no bare wire is exposed.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring (this video)
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
Questions about How to Replace a Flush-Mount Ceiling Light on a Stair Landing
How do I safely work on a light fixture located directly above a staircase?
Working on stairs requires a stable setup. Use a specialized tool like the Ladder-Aide Pro or a multi-position ladder configured for stairs to ensure your ladder is level and secure. Always have someone spot you if possible, and ensure your work area is clear of obstructions.
Are there any essential tools I need for this project, especially for safety or working on stairs?
Yes, a non-contact voltage tester is essential for verifying power is off before you start. For safety and stability when working on a staircase, a specialized ladder accessory like the IDEAL SECURITY Ladder-Aide Pro is highly recommended. You'll also need screwdrivers and pliers.
How do I correctly connect the wires for the new light fixture?
Typically, you'll connect the black wire from your ceiling (hot) to the black wire on the new fixture, and the white wire from your ceiling (neutral) to the white wire on the fixture. The bare copper or green wire from your ceiling (ground) connects to the fixture's ground wire or green screw. Always secure connections with wire nuts and ensure no bare wire is exposed.
What should I check if my new light fixture doesn't turn on after installation?
First, ensure the circuit breaker is switched back to the 'on' position. If it still doesn't work, turn off the power at the breaker again. Carefully re-check all wire connections within the electrical box to ensure they are tight and correctly matched (black-to-black, white-to-white, ground-to-ground).
Is replacing a flush-mount light on a stair landing a good DIY project for a beginner, and how long does it typically take?
Yes, this project is considered beginner-friendly as long as you strictly follow safety precautions, especially regarding power and ladder stability. It typically takes about 2 hours to complete, assuming you have all your tools and materials ready.
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

