Restore Power and Test
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 6 of 6 · Video by seejanedrill

Showing 5:24–5:39 of the source video. Watch the full video with every moment.
What happens in this clip
Once the new light fixture is fully assembled and secured, return to your electrical panel. Remove the warning sign and flip the circuit breaker back to the 'on' position. Go to the light switch that controls the fixture and turn it on to test the new light. It should illuminate immediately, signifying a successful installation.
Goal: Verify the new light fixture is working correctly.
What's used
Tools
- Electrical Panel (Breaker Box)
About the full video
This project provides a detailed, step-by-step guide on how to safely replace an existing ceiling light fixture with a new one. It covers essential safety precautions, proper removal of the old fixture, correct wiring procedures for the new fixture (including ground, neutral, and hot connections), and final assembly.
Step 6 of 6: Restore power and test the new fixture
Go back to the electrical panel and flip the circuit breaker back to the 'ON' position. Return to the stair landing and test the light switch. The new fixture should illuminate. If it does not, turn the power off again and recheck all wiring connections.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test (this video)
- 5:02–5:17 Restore Power and Test Light
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

