Mount the Fixture and Attach Shade
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 5 of 6 · Video by ehowhome

Showing 2:29–2:55 of the source video. Watch the full video with every moment.
What happens in this clip
With the wires connected and neatly tucked into the electrical box, align the base of the new light fixture with the screws extending from the previously installed mounting bracket. Push the fixture base against the ceiling and secure it by threading and tightening the decorative nuts onto the mounting screws. Finally, place the glass shade back onto the fixture and secure it with its decorative finial nut.
Goal: Securely install the light fixture's base and reattach the decorative shade.
What's used
Tools
- Decorative Nuts
- Finial Nut
- Glass Shade
- New Light Fixture
About the full video
This project guides you through the process of replacing an old ceiling light fixture with a new one. It covers identifying different types of electrical boxes, understanding standard household wiring (hot, neutral, ground), safely connecting the wires, mounting the new fixture, and finally attaching the decorative elements.
Step 5 of 6: Mount the new fixture and attach covers
Carefully tuck the wired connections into the electrical box. Align the new fixture with the mounting bracket and secure it according to the manufacturer's instructions. This usually involves screws or a twist-lock mechanism. Once the fixture is securely mounted, attach any decorative covers, shades, or diffusers.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade (this video)
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
Questions about How to Replace a Flush-Mount Ceiling Light on a Stair Landing
How do I safely work on a light fixture located directly above a staircase?
Working on stairs requires a stable setup. Use a specialized tool like the Ladder-Aide Pro or a multi-position ladder configured for stairs to ensure your ladder is level and secure. Always have someone spot you if possible, and ensure your work area is clear of obstructions.
Are there any essential tools I need for this project, especially for safety or working on stairs?
Yes, a non-contact voltage tester is essential for verifying power is off before you start. For safety and stability when working on a staircase, a specialized ladder accessory like the IDEAL SECURITY Ladder-Aide Pro is highly recommended. You'll also need screwdrivers and pliers.
How do I correctly connect the wires for the new light fixture?
Typically, you'll connect the black wire from your ceiling (hot) to the black wire on the new fixture, and the white wire from your ceiling (neutral) to the white wire on the fixture. The bare copper or green wire from your ceiling (ground) connects to the fixture's ground wire or green screw. Always secure connections with wire nuts and ensure no bare wire is exposed.
What should I check if my new light fixture doesn't turn on after installation?
First, ensure the circuit breaker is switched back to the 'on' position. If it still doesn't work, turn off the power at the breaker again. Carefully re-check all wire connections within the electrical box to ensure they are tight and correctly matched (black-to-black, white-to-white, ground-to-ground).
Is replacing a flush-mount light on a stair landing a good DIY project for a beginner, and how long does it typically take?
Yes, this project is considered beginner-friendly as long as you strictly follow safety precautions, especially regarding power and ladder stability. It typically takes about 2 hours to complete, assuming you have all your tools and materials ready.
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

