Attach New Fixture Wires
From How to Replace a Flush-Mount Ceiling Light on a Stair Landing · Step 4 of 6 · Video by fordummies

Showing 0:54–1:04 of the source video. Watch the full video with every moment.
What happens in this clip
Take the new light fixture and identify its corresponding wires (black for hot, white for neutral, green/bare for ground). Twist together the black wire from the new fixture with the black (hot) wire from the electrical box, and secure them with a new wire nut. Repeat this process for the white (neutral) wires and the green/bare (ground) wires. Ensure each wire nut is tightly twisted and provides a secure connection.
Goal: Electrically connect the new fixture to the house's wiring.
What's used
Tools
- Electrical box wires
- Wire nuts
- Wires from new fixture
About the full video
This project provides step-by-step instructions on how to safely replace an existing ceiling light fixture with a new one. It covers crucial safety precautions like turning off power and testing wires, disconnecting the old fixture, connecting the new wiring, and finally mounting the new fixture and restoring power.
Step 4 of 6: Wire the new light fixture
Match the wires from the new fixture to the wires from the ceiling electrical box. Typically, black (hot) connects to black, white (neutral) connects to white, and green or bare copper (ground) connects to green or bare copper. Secure each connection by twisting a wire nut tightly onto the joined wires. Ensure no bare wire is exposed.
Every video in How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Step 1: Turn off power at the breaker
- 0:42–0:49 Turn Off Power at Circuit Breaker
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:10–0:12 Turn Off Power at Circuit Breaker
Step 2: Remove the old light fixture
- 0:39–1:37 Remove Old Fixture and Wiring
- 0:11–0:30 Turn Off Power & Remove Old Fixture
- 0:38–1:17 Remove Old Light Fixture and Bracket
Step 3: Install the new fixture's mounting bracket
- 3:51–4:53 Remove Old Mounting Bracket and Install New One
- 1:17–1:30 Replace Mounting Bracket
- 0:40–0:42 Install Mounting Bracket
Step 4: Wire the new light fixture
- 0:54–1:04 Attach New Fixture Wires (this video)
- 2:46–3:50 Connect New Light Fixture Wiring
- 6:28–7:18 Connect New Fixture's Electrical Wires
Step 5: Mount the new fixture and attach covers
- 1:04–1:17 Mount New Fixture Base
- 2:29–2:55 Mount the Fixture and Attach Shade
- 2:29–2:55 Mount the Fixture and Attach Shade
Step 6: Restore power and test the new fixture
- 10:35–10:39 Restore Power and Test the New Fixtures
- 5:24–5:39 Restore Power and Test
- 5:02–5:17 Restore Power and Test Light
How to Replace a Flush-Mount Ceiling Light on a Stair Landing
Outline for replacing a flush-mount ceiling light fixture on a stair landing, covering safety precautions, fixture removal, new fixture installation, and testing.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

