powered by

Preparing and Cutting Mitered Handrail Sections

From How to Install a Handrail on a Spiral Staircase · Step 3 of 8 · Video by The Tall Carpenter

Showing 9:39–13:17 of the source video. Watch the full video with every moment.

What happens in this clip

For the next section of handrail, the presenter marks the precise points for a mitered joint. He takes a pre-cut mitered piece of handrail provided by the manufacturer and carefully separates it with a hammer, as it's not the exact size needed. He uses a hand saw to cut the required tenons from the larger handrail piece. He then employs a router to create a slot for a biscuit joint, which will provide additional strength and alignment to the mitered connection. He inserts a biscuit into the slot of one piece. He also prepares a dowel hole on the other end of the handrail. He emphasizes the importance of making the cuts slightly longer than necessary to allow for adjustment and a perfect fit.

Goal: The presenter measures, marks, and cuts the mitered handrail sections, preparing them for biscuit and dowel joints to connect the corner.

What's used

Tools

  • Hammer
  • Hand Saw
  • Pencil
  • Router (Biscuit Jointer)
  • Tape Measure

Materials

  • Wood Biscuits (Number 10)
  • Wooden Dowel

About the full video

This video provides a detailed guide on installing half newels and handrails for an oak staircase, focusing on precise measurements, cutting tenons, assembling with wood glue and dowels, and preparing the structure for final finishing. The process involves careful alignment and secure fastening to ensure a stable and aesthetically pleasing stair railing system.

Step 3 of 8: Prepare Handrail Ends for Connection

Depending on the handrail system and material, this may involve chamfering edges, drilling holes for connecting hardware, or preparing surfaces for welding or adhesive bonding. For wood handrails, this might include creating specific joint types like mitered or scarf joints. For metal, it could involve grinding edges for welding or preparing for threaded connectors.

Open this step in the guide

Every video in How to Install a Handrail on a Spiral Staircase

  1. Step 1: Measure and Mark Handrail Length

  2. Step 2: Cut Handrail Material

  3. Step 3: Prepare Handrail Ends for Connection

  4. Step 4: Locate and Mark Support Brackets

  5. Step 5: Install Handrail Support Brackets

  6. Step 6: Attach Handrail to Brackets

  7. Step 7: Join Handrail Sections (if applicable)

  8. Step 8: Inspect and Test Handrail Stability

How to Install a Handrail on a Spiral Staircase

Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Preparing and Cutting Mitered Handrail Sections — How to Install a Handrail on a Spiral Staircase | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.