Measure and Cut Handrail
From How to Install a Handrail on a Spiral Staircase · Step 2 of 8 · Video by The Fixer 2

Showing 0:00–0:43 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by measuring the length of the existing top railing of your deck stairs where the new handrail will be installed. The video demonstrates measuring approximately 90 inches along the top edge of the existing railing. Once the length is determined, use a miter saw to make a clean, square cut on one end of the round wooden handrail. Then, measure the full required length (e.g., 90 inches) from that cut end, mark it with a pencil, and make the final cut to size with the miter saw. Ensure both ends are cut cleanly.
Goal: Measure the required length for the wooden handrail along the existing deck railing, then cut the handrail to this precise length using a miter saw.
What's used
Tools
- Measuring Tape
- Miter Saw
- Pencil
Materials
- Round Wooden Handrail
About the full video
This video provides a step-by-step guide on how to install a wooden handrail on a deck staircase using metal brackets. The process involves precise measuring and cutting of the handrail, marking and drilling pilot holes, and securely fastening the handrail to the staircase newel posts and stringer with four strategically placed metal brackets.
Step 2 of 8: Cut Handrail Material
Using the markings made in the previous step, carefully cut the handrail material to the required lengths. The type of saw used will depend on the handrail material (e.g., miter saw for wood, reciprocating saw or metal-cutting saw for metal). Ensure cuts are clean and precise to facilitate a smooth connection and proper fit along the spiral.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail (this video)
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

